0
I have an Original DM900 UHD with a fixed red light. When I connect the DM900 to the Computer via Mini USB cable, Windows 10 automatically detects it. I open the software: OptiFlasher_DMipsV3.0.5.0_BETA5 and configure it in
Recovery/rescue mode as shown in the video on youtube, link taken from the forum. The problem is, the software does not detect the DM900. The software tells me:
Power ON DB Device [ESC to Abort]
Ballance Credits: 20
And nothing else. How do I solve the problem?
P.S. Putty also does not detect the DM900. The log is not created.
The drivers were installed automatically.
Recovery/rescue mode as shown in the video on youtube, link taken from the forum. The problem is, the software does not detect the DM900. The software tells me:
Power ON DB Device [ESC to Abort]
Ballance Credits: 20
And nothing else. How do I solve the problem?
P.S. Putty also does not detect the DM900. The log is not created.
The drivers were installed automatically.
