[dodo]

0

I Have Klon sim 2.01 dreambox HD Pwr ssl84a
320gb 2.5 inc samsung hdd at barry allen

Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV
'Power on DB Device (ESC to Abort)
Operation Start at : 16:50:37
DM800HD Detected !
Wrong Boot Response'


DreamUp universal v2009 files patched by repair with fornix natas and I connect with the enforcer
but
20:40:29 box type: DM800
20:40:38 Calculating checksum ...
from waiting for the OK box to begin uploading ...

Unfortunately, he remains

Help please

---

I Have Klon sim 2.01 dreambox HD Pwr ssl84a
320gb 2.5 inc samsung hdd at barry allen

Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV
'Power on DB Device (ESC to Abort)
Operation Start at : 16:50:37
DM800HD Detected !
Wrong Boot Response'


DreamUp universal v2009 files patched by repair with fornix natas and I connect with the enforcer
but
20:40:29 box type: DM800
20:40:38 Calculating checksum ...
from waiting for the OK box to begin uploading ...

Unfortunately, he remains

Help please

Ncf sim2 V2

Acces violation at adress 00526476 in module 'NCF SIM2 v2 exe'. Reload of adress 0ABE66FC. OK

---

Waiting for reply Yassınov

[dodo]

0

I Have Klon sim 2.01 dreambox HD Pwr ssl84a
320gb 2.5 inc samsung hdd at barry allen

Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV
'Power on DB Device (ESC to Abort)
Operation Start at : 16:50:37
DM800HD Detected !
Wrong Boot Response'


DreamUp universal v2009 files patched by repair with fornix natas and I connect with the enforcer
but
20:40:29 box type: DM800
20:40:38 Calculating checksum ...
from waiting for the OK box to begin uploading ...

Unfortunately, he remains

Help please

---

I Have Klon sim 2.01 dreambox HD Pwr ssl84a
320gb 2.5 inc samsung hdd at barry allen

Dreambox NCF Repair Tool SIM2 Edition v2.0 By YASSINOV
'Power on DB Device (ESC to Abort)
Operation Start at : 16:50:37
DM800HD Detected !
Wrong Boot Response'


DreamUp universal v2009 files patched by repair with fornix natas and I connect with the enforcer
but
20:40:29 box type: DM800
20:40:38 Calculating checksum ...
from waiting for the OK box to begin uploading ...

Unfortunately, he remains

Help please

Ncf sim2 V2

Acces violation at adress 00526476 in module 'NCF SIM2 v2 exe'. Reload of adress 0ABE66FC. OK

---

Waiting for reply Yassınov

Try remove sim & put it back then try again !
Your DM800 Hw detected but not answer to the Preloader Detection that must be with this notification "Dreambox Detected Ok!"

Remove and re-put the sim card did not change, but the problem continues

---

DM800 LCD screen, off the sim card just says Error Ream Multimedia, etc. When inserting the com dm7020 look at the number found in ca.

---

When inserting the SIM card;
NCF Dreambox Repair Tool SIM2 Edition v2.0 By YASSINOV
'Power On, DB Device (ESC to Abort)
Operation Start at: 16:50:37
DM800HD Detected!
Boot Wrong Response

WRITES

---

Why Boot Wrong Response write on lcd screen

---

dream up 1 3 3 4 with the uploader of the 'waiting box begin to upload from the OK from' writing, but the installation does not start

[berth]

0

Hi All, after one week hard working for wake up my dead 2 day´s old DM 800 se HD, I found this site, and 5 min. later I have a working box. I tryed dreamup with enforcer, but still keep up: ca not found, and later: file to big.
But with the NCF, it stop in the middel of the progres and write job not finish, but no worry, on the box was ****stop and IP adress, and then I could flash on the browser with the IP adress, and download inf. file.
So therefore a big hand and a lot of thanks to master yassinov, you make my day.
berth

[shpendi_22]

0

Hallo Yassinov
please help me i have a problem since yesterday with my dreambox 800 clone. i like to change my image and now
ERR: No Ca Found

Can You help me ?

Thank you