[grecianboyz]

0

Hello to all
I have an INET500HD with ferrari sim . I tried several programs as dreamup for ferrari sim , optiflasher but my receiver is still "dead"

It works when i connect it with serial (mini usb to it's service port) but with dream up i'm waiting for acknowledge for hours...

With optiflasher i can connect via com port , but i tried all the possible operations (no ca found , write bootloader , write image). When i press the do job button i turn off my receiver , turn it on again , the optiflasher recognizes the receiver and the com port ,
My settings are
COM2 LD3 FOR FERRARI SIM (I TRIED ALSO LD1)
Connect only with rs232/usb mode
Press do job (repair ca or write bootloader)


Power ON DB Device [ESC to Abort]
DM500HD Detected !
Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: DM500HDSSL87F.nfi
FSize: 126784 bytes

But it stacks there. Nothing happens after it.

Finally i connected via terminal and here are the results

BCM74130011
012
K1
K2

K3

K4

K5

Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000004
WC1=FFFFFFEC
RC2=00000018
WC2=00000037
RC3=0000000E
WC3=FFFFFFEC
RC4=0000000E
WC4=00000035
NWC=00000010
RC5=00000005
WC5=00000010
RC6=00000018
WC6=00000010
NRC=0000000E
RW=00000014
WW=0000004A
G=00000000 R=0000000E W=00000010
BL=00000000
RC1=00000001
RC2=00000016

BL=00000001
RC1=00000003
RC2=00000018

BL=00000002
RC1=00000002
RC2=00000017

BL=00000003
RC1=00000005
RC2=00000018

BL=00000004
RC1=00000001
RC2=00000017

BL=00000005
RC1=00000005
RC2=0000001A

BL=00000006
RC1=00000001
RC2=00000018

BL=00000007
RC1=00000003
RC2=0000001F
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM500HD

FIRST STAGE 1.2/400 {BI5I6E5xE3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #77 (20100517)

[fairbird]

0

For DM500HD and DM800se, Should be use both cable to gather (mini usb + lan) to fix no ca found..
Try to connect your box with pc direct ..without router

Here how to fix no ca found
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[grecianboyz]

0

Hello.
I do not know how to connect my pc with the dreambox. I used a crossover cable , i set my ip to static but i do not know a way to see the ip of the dreambox. The receiver has no screen, only a led.

I thinks it is a sim or flash problem. I tried to fix sectors with optiflasher but...

Power ON DB Device [ESC to Abort]
DM500HD Detected !
Dreambox Detected...Ok!
Sectors Recovery Prepare...
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
I/O error 6
EInOutError

[fairbird]

0

No need to get ip to fix your box...
just follow what i given you that linke in previous replay
connect your box direct from pc to box by mini usb cable + lan cable (direct cable)

[fairbird]

0

Closed Not Followed ...