+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Inet 500hd serious problem (ferrari sim) (/showthread.php?tid=1833)
Inet 500hd serious problem (ferrari sim) - grecianboyz - 07-12-2013
Hello to all
I have an INET500HD with ferrari sim . I tried several programs as dreamup for ferrari sim , optiflasher but my receiver is still "dead"
It works when i connect it with serial (mini usb to it's service port) but with dream up i'm waiting for acknowledge for hours...
With optiflasher i can connect via com port , but i tried all the possible operations (no ca found , write bootloader , write image). When i press the do job button i turn off my receiver , turn it on again , the optiflasher recognizes the receiver and the com port ,
My settings are
COM2 LD3 FOR FERRARI SIM (I TRIED ALSO LD1)
Connect only with rs232/usb mode
Press do job (repair ca or write bootloader)
Power ON DB Device [ESC to Abort]
DM500HD Detected !
Dreambox Detected...Ok!
Sending Ferrari Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: DM500HDSSL87F.nfi
FSize: 126784 bytes
But it stacks there. Nothing happens after it.
Finally i connected via terminal and here are the results
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000004
WC1=FFFFFFEC
RC2=00000018
WC2=00000037
RC3=0000000E
WC3=FFFFFFEC
RC4=0000000E
WC4=00000035
NWC=00000010
RC5=00000005
WC5=00000010
RC6=00000018
WC6=00000010
NRC=0000000E
RW=00000014
WW=0000004A
G=00000000 R=0000000E W=00000010
BL=00000000
RC1=00000001
RC2=00000016
BL=00000001
RC1=00000003
RC2=00000018
BL=00000002
RC1=00000002
RC2=00000017
BL=00000003
RC1=00000005
RC2=00000018
BL=00000004
RC1=00000001
RC2=00000017
BL=00000005
RC1=00000005
RC2=0000001A
BL=00000006
RC1=00000001
RC2=00000018
BL=00000007
RC1=00000003
RC2=0000001F
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM500HD
FIRST STAGE 1.2/400 {BI5I6E5xE3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #77 (20100517)
RE: Inet 500hd serious problem (ferrari sim) - fairbird - 07-12-2013
For DM500HD and DM800se, Should be use both cable to gather (mini usb + lan) to fix no ca found..
Try to connect your box with pc direct ..without router
Here how to fix no ca found
RE: Inet 500hd serious problem (ferrari sim) - grecianboyz - 07-15-2013
Hello.
I do not know how to connect my pc with the dreambox. I used a crossover cable , i set my ip to static but i do not know a way to see the ip of the dreambox. The receiver has no screen, only a led.
I thinks it is a sim or flash problem. I tried to fix sectors with optiflasher but...
Power ON DB Device [ESC to Abort]
DM500HD Detected !
Dreambox Detected...Ok!
Sectors Recovery Prepare...
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
I/O error 6
EInOutError
RE: Inet 500hd serious problem (ferrari sim) - fairbird - 07-15-2013
No need to get ip to fix your box...
just follow what i given you that linke in previous replay
connect your box direct from pc to box by mini usb cable + lan cable (direct cable)
RE: Inet 500hd serious problem (ferrari sim) - fairbird - 08-01-2013
Closed Not Followed ...