[plovidba]

0

dm800hd original


This is Hyperterminal read out, is this possible repaired, all other compounds impossible

----------------------

© 2007,2008 Dream Multimedia GmbH. All rights reserved.

Dreambox D M800

FIRST STAGE 1.00 {BO23456}


2ND STAGE OK, build #84 (2011-09-02)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}



---------------



danke

[fairbird]

0

What is the problem exactly ?

[plovidba]

0

What is the problem exactly ?

dreambox no LAN connection, no ip, does not respond to dremup,
the display stands DreamMultimedia

[fairbird]

0

If you got only "DreamMultimedia Error" this mean sim problem maybe corrupted or stick ..
So..Try this:
1-open box
2-remove sim and clean it from dust
3-replace it again and make sure in correct place.
4-turn on power
If box booting again it is ok,
If not..
Read this post and follow (1-Null modem cable only without Network lan) and flash new (original image)
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

P.s: Should by to select loader (LD2) for genuine sim, but you need to make donation to get pro key for optiflasher because LD2 option not free

If still not recognize box with optiflasher then try another pc and another null cable..

[plovidba]

0

thanks for the reply, Lan works

Problem now is, on dysplay, no CA from secondstage loader, image not working

[fairbird]

0

Flash new image (original image) or at least flash bootloader here download SSl84 for Genuine box
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[plovidba]

0

THANK YOU, THANK YOU BIG

WITH THIS IMAGE HAVE I BEEN MONITORED DREAMBOX

[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[fairbird]

0

If you fixed with that image, this mean your box (sim) not genuine clone...

[plovidba]

0

checked everything about genuine

dreambox is original, Sim is original



receiver still shows defective sectors with dreamup but receiver image works well, a little warmer than normal, I think due to lack of RaM
-------------------------------------------------- -------------------
to crash, this is what I've done

1 with optical flasher I got the first contact with dreambox, shows on the receiver's display ip
was interesting that the turn of the cable has helped, if no contact between receiver and optical flasher was available.
2 [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] install image with dreamup or IE

tried different image [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]


best has newnigma2-release-dm800-v2.8.4_SSL72_TSv2.rar works

-------------------------------------------------- ---------------

[fairbird]

0

So your box now working?
Solved...
Can I close topic under solved?