+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox OptiFlasher Pro [Basic EDition] (https://www.yassinov.com/forum/forumdisplay.php?fid=35)
+--- Thread: dm 800hd (/showthread.php?tid=1705)
Pages:
1
2
dm 800hd - plovidba - 05-21-2013
dm800hd original
This is Hyperterminal read out, is this possible repaired, all other compounds impossible
----------------------
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox D M800
FIRST STAGE 1.00 {BO23456}
[m
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
---------------
danke
RE: dm 800hd - fairbird - 05-21-2013
What is the problem exactly ?
RE: dm 800hd - plovidba - 05-21-2013
(05-21-2013, 07:30 PM)fairbird Wrote: You are not allowed to view links. Register or Login to view.What is the problem exactly ?
dreambox no LAN connection, no ip, does not respond to dremup,
the display stands DreamMultimedia
RE: dm 800hd - fairbird - 05-21-2013
If you got only "DreamMultimedia Error" this mean sim problem maybe corrupted or stick ..
So..Try this:
1-open box
2-remove sim and clean it from dust
3-replace it again and make sure in correct place.
4-turn on power
If box booting again it is ok,
If not..
Read this post and follow (1-Null modem cable only without Network lan) and flash new (original image)
P.s: Should by to select loader (LD2) for genuine sim, but you need to make donation to get pro key for optiflasher because LD2 option not free
If still not recognize box with optiflasher then try another pc and another null cable..
RE: dm 800hd - plovidba - 05-22-2013
(05-21-2013, 10:47 PM)fairbird Wrote:
P.s: Should by to select loader (LD2) for genuine sim, but you need to make donation to get pro key for optiflasher because LD2 option not free
If still not recognize box with optiflasher then try another pc and another null cable..
thanks for the reply, Lan works
Problem now is, on dysplay, no CA from secondstage loader, image not working
RE: dm 800hd - fairbird - 05-22-2013
Flash new image (original image) or at least flash bootloader here download SSl84 for Genuine box
RE: dm 800hd - plovidba - 05-23-2013
THANK YOU, THANK YOU BIG
WITH THIS IMAGE HAVE I BEEN MONITORED DREAMBOX
RE: dm 800hd - fairbird - 05-23-2013
If you fixed with that image, this mean your box (sim) not genuine clone...
RE: dm 800hd - plovidba - 05-27-2013
checked everything about genuine
dreambox is original, Sim is original
receiver still shows defective sectors with dreamup but receiver image works well, a little warmer than normal, I think due to lack of RaM
-------------------------------------------------- -------------------
to crash, this is what I've done
1 with optical flasher I got the first contact with dreambox, shows on the receiver's display ip
was interesting that the turn of the cable has helped, if no contact between receiver and optical flasher was available.
2 install image with dreamup or IE
tried different image
best has newnigma2-release-dm800-v2.8.4_SSL72_TSv2.rar works
-------------------------------------------------- ---------------
RE: dm 800hd - fairbird - 05-27-2013
So your box now working?
Solved...
Can I close topic under solved?