[amrinder]

0

hello friends one week ago i buy 2 pcs sunray4 v2 clone triple tuner from china
box are working fine and newgizma image in this receiver
i installed ts image in this box via browser
image flash successfully
when start stb not booting only sim2 show in stb screen nothing happen more
no any error show
i installed other image via browser and also use optiflasher but same problum
i also use no ca found command in optiflasher
optiflasher show complete but same result
i attach a photo
please give me solution

[fairbird]

0

If you got (No ca Found)..
Then you flash wrong image/bootloader
You have sim2 boxes so must be to flash Sim2 image ...

Read this solved topics:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

And If you flash correct image but the box stuck on dhcp, then flash new image by using optiflasher with (Recovered bad sectors)

P.S: Must be you to use both cables to gather (mini usb + Lan)

[amrinder]

0

friend if i click on recovery bad secter and then on write image and restore backup
after on do do job but error show use advance mode 1 or 2
i dont find advance mode1 or2

[fairbird]

0

Follow instantiations carefully..
-Click on Advanced
-Select port
-Select Loder (LD1) for sim2
-Then from right click on Settings

Then you can select advanced mode 2

[amrinder]

0

dear i flash image and also use ca no found but same problum

[fairbird]

0

How much time your box took to flashed image?!
Around 1 hour and more?! or Just few minutes?!

[amrinder]

0

only 4 minute with optiflasher

[fairbird]

0

Then it was wrong way ...
Should be as I advised to you (Flash image with Advanced mode2) by optiflasher with (mini usb + Lan)
Must be take flashing around 1 and half hour