sunray4 v2 boot problum - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: sunray4 v2 boot problum (/showthread.php?tid=3517)

sunray4 v2 boot problum - amrinder - 04-02-2015 hello friends one week ago i buy 2 pcs sunray4 v2 clone triple tuner from china box are working fine and newgizma image in this receiver i installed ts image in this box via browser image flash successfully when start stb not booting only sim2 show in stb screen nothing happen more no any error show i installed other image via browser and also use optiflasher but same problum i also use no ca found command in optiflasher optiflasher show complete but same result i attach a photo please give me solution RE: sunray4 v2 boot problum - fairbird - 04-02-2015 If you got (No ca Found).. Then you flash wrong image/bootloader You have sim2 boxes so must be to flash Sim2 image ... Read this solved topics: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] And If you flash correct image but the box stuck on dhcp, then flash new image by using optiflasher with (Recovered bad sectors) P.S: Must be you to use both cables to gather (mini usb + Lan) RE: sunray4 v2 boot problum - amrinder - 04-02-2015 friend if i click on recovery bad secter and then on write image and restore backup after on do do job but error show use advance mode 1 or 2 i dont find advance mode1 or2 RE: sunray4 v2 boot problum - fairbird - 04-02-2015 Follow instantiations carefully.. -Click on Advanced -Select port -Select Loder (LD1) for sim2 -Then from right click on Settings Then you can select advanced mode 2 RE: sunray4 v2 boot problum - amrinder - 04-03-2015 dear i flash image and also use ca no found but same problum RE: sunray4 v2 boot problum - fairbird - 04-03-2015 How much time your box took to flashed image?! Around 1 hour and more?! or Just few minutes?! RE: sunray4 v2 boot problum - amrinder - 04-04-2015 only 4 minute with optiflasher RE: sunray4 v2 boot problum - fairbird - 04-04-2015 Then it was wrong way ... Should be as I advised to you (Flash image with Advanced mode2) by optiflasher with (mini usb + Lan) Must be take flashing around 1 and half hour