07-18-2012, 05:47 PM
0
Thanks for the quick response using optiflasher December 1.0.9.b when I want to put the
Power ON DB Device [Esc to Abort]
DM800HD SE Detected! Dreambox Detected ... Ok!
Sending flash loader ... Second Stage OK!
Success Boot & Ready For Job Process!
Name: secondstage-84b.nfi FSize: 174 832 bytes
on the display appears to me
192.168.1.77
SERIAL SETUP ***
So that is all that stops and nothing happens
when im unplug the Dreambox 800s clone sim 2.10 and turned on again appears to me the
BIOS NO CA FOUND
If im use DreamUP 1.3.3.7 or any other upload waiting for compleated acknowlege Thanks for the quick response
Power ON DB Device [Esc to Abort]
DM800HD SE Detected! Dreambox Detected ... Ok!
Sending flash loader ... Second Stage OK!
Success Boot & Ready For Job Process!
Name: secondstage-84b.nfi FSize: 174 832 bytes
on the display appears to me
192.168.1.77
SERIAL SETUP ***
So that is all that stops and nothing happens
when im unplug the Dreambox 800s clone sim 2.10 and turned on again appears to me the
BIOS NO CA FOUND
If im use DreamUP 1.3.3.7 or any other upload waiting for compleated acknowlege Thanks for the quick response