+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: BIOS NO CA FOUND (DM800se SIM2.10) (/showthread.php?tid=966)
Pages:
1
2
BIOS NO CA FOUND (DM800se SIM2.10) - Nedzad - 07-18-2012
-DM800se
-Clone
-SIM2.10
HELO I tried that I find in this forum as a solution to fix the problem here is an example
Hyper terminal
FIRST STAGE BE3E3E3E3E3 1.0/400 {} Second stage loader was not found. Do not panic - it's not a (real) problem. You do not need to repair your Dreambox. It just means that the FlashROM with The graphical menu was erased. You can restore this with a tool like DreamUP with serial access. RESCUE {012}
Mini-FlashUp, build # 84 (01/09/2011)
0000 - BCM board setup
0000 - fp init
0000 - ca init
ATR is too short
ATR is too short
ATR is too short
ATR is too short
ATR is too short
CA disabled
OLED found!
Color OLED reset
NO CONFIGURATION DATA PRESENT. STOP.
LCD: * In the BIOS NO CA FOUND
1385 OLED: string too long: '* In the BIOS NO CA FOUND'
I tried all possible ways I know that the BOOT # 79 THANK YOU
RE: BIOS NO CA FOUND - fairbird - 07-18-2012
Ok ...
1-Download this SSl84b from this link and extract it..
2-See here how to flash and use "Flashing by Null modem cable only without Network lan" method.
3-Use optiflasher and flash SSl84b.
4-unplug your box and plug it and see if booting fine.
5-If booting fine it is ok, if not try to flash this image then unplug and plug box.
Let us know to solve or not...
RE: BIOS NO CA FOUND - Nedzad - 07-18-2012
Thanks for the quick response using optiflasher December 1.0.9.b when I want to put the
Power ON DB Device [Esc to Abort]
DM800HD SE Detected! Dreambox Detected ... Ok!
Sending flash loader ... Second Stage OK!
Success Boot & Ready For Job Process!
Name: secondstage-84b.nfi FSize: 174 832 bytes
on the display appears to me
192.168.1.77
SERIAL SETUP ***
So that is all that stops and nothing happens
when im unplug the Dreambox 800s clone sim 2.10 and turned on again appears to me the
BIOS NO CA FOUND
If im use DreamUP 1.3.3.7 or any other upload waiting for compleated acknowlege Thanks for the quick response
RE: BIOS NO CA FOUND - fairbird - 07-18-2012
Must be mini usb and LAN cables together connect to box with pc..
Any way try this SUNRAY FlashUP Clone from attach..and flash SSl
Don't forget to remove check from Use network..
RE: BIOS NO CA FOUND (DM800se SIM2.10) - Nedzad - 07-18-2012
SUNRAY FlashUP Clone
upload waiting for compleated acknowlege
on disply ERR1:NO CA Found
I do not know what it is what the problem is hardware not think it was just a problem in the software and the card may be corrupted
if any other ideas
thanks
trying to find any solution
RE: BIOS NO CA FOUND (DM800se SIM2.10) - fairbird - 07-19-2012
Remove Sim clean it and make sure it is sim2.10..then return it back close box and try with optiflasher again and flash this bootloader from attach...
RE: BIOS NO CA FOUND (DM800se SIM2.10) - Nedzad - 07-19-2012
can not be inserted wrong bootloader probably says that to issue cards if anything I find an option I'll leave a message NCF SIM2 v2.5 by yassinov starts but the image or a card or not still behaves the same boot image Pached ssl82 image but can not do anything to run on the remote and again when you turn off the BIOS NO CA FOUND sickness whereof shall yassinov invent new softvare
NCF SIM2 SOME
hope the new version
thanks
RE: BIOS NO CA FOUND (DM800se SIM2.10) - fairbird - 07-19-2012
Why "wrong bootloader" it is for sim2.01 and sim2.10...maybe your box have some hardware error..
With optiflasher not succeed with dreamup also and with special version for your box SUNRAY FlashUP Clone also not accepted...
Have you remove sim and cleaned then tried with optiflasher again ?
RE: BIOS NO CA FOUND (DM800se SIM2.10) - Nedzad - 07-19-2012
I cleaned out a simple card was installed image-GP3-.HD.MOD.DM800Se SIM2 # 84A-riyad66 is something I do not know softvare update appeared and when I turned on the BIOS NO CA FOUND
sim 2.10
I think that it is not hardware error might Card something wrong
and why the says BIOS NO CA FOUND
RE: BIOS NO CA FOUND (DM800se SIM2.10) - fairbird - 07-20-2012
Second Stage loader (bootloader) (SSlxx) it connect to bios and recognize to an image if Appropriate or not, So as i said maybe some hardware error (i'm not sure) maybe some pin not connected with sim..
Best way..to check another sim on your box or check your sim in on other box..
or check your sim by cardreader "Gemplus GPR PCMCIA"
......
Also try to flash your box by another pc and make sure mini usb and LAN cable working..