0
update: I was using a charge only cable. The universal dreamup now connects, but doesn't complete with success.
If you can recommend a tool here that would remove the problem that would be great!
many thanks.
I found a tool DB NCF repair tool SIM2 ed v2.1 by YASSINOV
Tried ssl82,ssl84 and ssl84a.
The log says starting repair [NO CA FOUND]] injecting phase 1...
Finalizing job Phase2... please wait...
Status=100%
Button bar at botton says busy.
DB says: SIM2&4 192.168.1.77 *** SERIAL MODE
When I disconnect and reboot the DB, back to NO CA FOUND.
I'm happy to donate to get a tool that will help recover DB, any pointers would be of help.
Thanks!!!!
If you can recommend a tool here that would remove the problem that would be great!
many thanks.
I found a tool DB NCF repair tool SIM2 ed v2.1 by YASSINOV
Tried ssl82,ssl84 and ssl84a.
The log says starting repair [NO CA FOUND]] injecting phase 1...
Finalizing job Phase2... please wait...
Status=100%
Button bar at botton says busy.
DB says: SIM2&4 192.168.1.77 *** SERIAL MODE
When I disconnect and reboot the DB, back to NO CA FOUND.
I'm happy to donate to get a tool that will help recover DB, any pointers would be of help.
Thanks!!!!