The following warnings occurred: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Warning [2] Undefined array key "isclosed" - Line: 203 - File: inc/plugins/guestwarn.php PHP 8.2.26 (Linux)
|
com port not detected - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: com port not detected (/showthread.php?tid=4602) |
com port not detected - bsat - 08-30-2017 Hi, box is dm800se clone and I have the NO CA FOUND message on boot :-( I have tried to recover using the mini USB on the rear of the box. The PC does not detect the attached device. I only get COM1, rather than a new device like COM4. Can you suggest if there is a tool that may be able to recover the STB. On windows7, 64bit. many thanks! RE: com port not detected - bsat - 08-31-2017 update: I was using a charge only cable. The universal dreamup now connects, but doesn't complete with success. If you can recommend a tool here that would remove the problem that would be great! many thanks. I found a tool DB NCF repair tool SIM2 ed v2.1 by YASSINOV Tried ssl82,ssl84 and ssl84a. The log says starting repair [NO CA FOUND]] injecting phase 1... Finalizing job Phase2... please wait... Status=100% Button bar at botton says busy. DB says: SIM2&4 192.168.1.77 *** SERIAL MODE When I disconnect and reboot the DB, back to NO CA FOUND. I'm happy to donate to get a tool that will help recover DB, any pointers would be of help. Thanks!!!! |