[waj1980]

0

been trying to solve this no ca error on my dm800 hd sim 2.10 i also have a spare sim 2.01 if needed
optiflasher sends flash loader but its taking ages and only moves 1% every 10/15 minutes i connected to hyperterminal and these are the results
please help


© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #84 (2011-09-02)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
cannot read cert(2)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

[fairbird]

0

So read this topic and Follow "Fix Bad Sector "Sectors Recovery"
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
1-select com (If doesn't connect try to change Baudrate between 57600 & 115200)
2-select Loader [LD1] For sim2
3-click settings and choose "sectors recover"
4-select [Repair No Ca Found] and choose DM800-sim2.01-ssl84b
5-click "Do job" and turn on power to box and wait to connect with box and repair the problem.

[waj1980]

0

Still the same baudrate 57600 wouldnt recognise the box and 115200 is still doin it goes upto 10-15% and just stops

[fairbird]

0

-Try another pc (win xp better)
-Try another null cable

[waj1980]

0

Sorted it! Probably good to mention that I was using a laptop before with a usb to serial convertor
Managed to get hold of a computer with Xp and it worked straight away

Thanks

[fairbird]

0

Closed Under Solved..