[alphab99]

0

Hi everybody,

i checked on the other posts but didn't find a solution for me.

I've a sunray sr4 48p, i installed a firmware openpli and didn't work, then i used sunray-flushup and i was able to start openpli (i think that was a boot load problem) but when i switched off and on again i got the same error, then i tried install nemesis E1.6.

Now i still have NO CA FOUND but not work like before, i tried use dreambox optiflasher ,ncf sim2 e sunrasy flashup but no way.

I'm only able to get an ip address (192.168.1.77) but doesn't work, not ping, not telnet and not http, nothing.

The only try i did't do is with null modem cable i worked only with USB and windows driver

I'm very frustrated....can someone help me

[fairbird]

0

We want to see your sim ...Can you make two photos from both side of sim ?

[alphab99]

0

Of course fairbird

[alphab99]

0

Do you think that if i try with serial-usb cable instead usb cable i'll solve something?

[fairbird]

0

You sim A8P as like original sim So you can flash only original image with original bootloader..
So follow this topic and read it carefully
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[alphab99]

0

Hi guys,

i made one step ahead, now i can surf to the default ip address 192.168.1.77 and i'm able to see the firmware upload page, i use an old version of IE and i tried to upload many images, my sim is A8P and after the main image, before reboot the decoder, i installed a second stage but nothing changed, what kind of second stage i have to use?

The strange thing is that my friend told me to use a 2.10 ssl 84 because with my same box works, i tried to install the 2.10 ssl84 and on the front display i see the yellow loading bar.

Is possible that my sim A8p is an 2.10?
The other tools like dreamup and sunray flash doesn't recognize my box, i can only use optiflasher

[fairbird]

0

Of Course No....Don't flash any bootloader (secondstage) for any different sim...
You have (A8P) So only flash original bootloader
1-download here last SSl84
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
2-flash to box SSl84 then after finish Turn off box
3-Now flash any original image (NOT PATCHED IMAGES)
4-Turn off Box then Turn on