+- InfoServ (https://www.yassinov.com/forum)
+-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9)
+--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40)
+--- Thread: Sunray sr4 48p persistent NO CA FOUND (/showthread.php?tid=2224)
Sunray sr4 48p persistent NO CA FOUND - alphab99 - 11-27-2013
Hi everybody,
i checked on the other posts but didn't find a solution for me.
I've a sunray sr4 48p, i installed a firmware openpli and didn't work, then i used sunray-flushup and i was able to start openpli (i think that was a boot load problem) but when i switched off and on again i got the same error, then i tried install nemesis E1.6.
Now i still have NO CA FOUND but not work like before, i tried use dreambox optiflasher ,ncf sim2 e sunrasy flashup but no way.
I'm only able to get an ip address (192.168.1.77) but doesn't work, not ping, not telnet and not http, nothing.
The only try i did't do is with null modem cable i worked only with USB and windows driver
I'm very frustrated....can someone help me
RE: Sunray sr4 48p persistent NO CA FOUND - fairbird - 11-27-2013
We want to see your sim ...Can you make two photos from both side of sim ?
RE: Sunray sr4 48p persistent NO CA FOUND - alphab99 - 11-27-2013
Of course fairbird
RE: Sunray sr4 48p persistent NO CA FOUND - alphab99 - 11-27-2013
Do you think that if i try with serial-usb cable instead usb cable i'll solve something?
RE: Sunray sr4 48p persistent NO CA FOUND - fairbird - 11-27-2013
You sim A8P as like original sim So you can flash only original image with original bootloader..
So follow this topic and read it carefully
RE: Sunray sr4 48p persistent NO CA FOUND - alphab99 - 12-04-2013
Hi guys,
i made one step ahead, now i can surf to the default ip address 192.168.1.77 and i'm able to see the firmware upload page, i use an old version of IE and i tried to upload many images, my sim is A8P and after the main image, before reboot the decoder, i installed a second stage but nothing changed, what kind of second stage i have to use?
The strange thing is that my friend told me to use a 2.10 ssl 84 because with my same box works, i tried to install the 2.10 ssl84 and on the front display i see the yellow loading bar.
Is possible that my sim A8p is an 2.10?
The other tools like dreamup and sunray flash doesn't recognize my box, i can only use optiflasher
RE: Sunray sr4 48p persistent NO CA FOUND - fairbird - 12-04-2013
Of Course No....Don't flash any bootloader (secondstage) for any different sim...
You have (A8P) So only flash original bootloader
1-download here last SSl84
2-flash to box SSl84 then after finish Turn off box
3-Now flash any original image (NOT PATCHED IMAGES)
4-Turn off Box then Turn on