The following warnings occurred: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Warning [2] Undefined array key "isclosed" - Line: 203 - File: inc/plugins/guestwarn.php PHP 8.2.26 (Linux)
|
[Request] NO CA FOUND Strange problem - Printable Version +- InfoServ (https://www.yassinov.com/forum) +-- Forum: Satellite Equipment (https://www.yassinov.com/forum/forumdisplay.php?fid=9) +--- Forum: Dreambox NO CA FOUND Repair Tool (https://www.yassinov.com/forum/forumdisplay.php?fid=40) +--- Thread: [Request] NO CA FOUND Strange problem (/showthread.php?tid=2950) |
NO CA FOUND Strange problem - mau_ven - 09-06-2014 Dear all , good morning ! DECODER: SUNRAY 800 HD SE SR4 CLONE SIM A8P IMAGE: Nemesis 2.6 110r0 ERROR-:NO CA FOUND story .... (the decoder does not recognize internal HD) and I wanted to try a new image I tried to reset the decoder with Optiflasher pro with the appropriate option, but when restart the decoder ( program asks me the IP address std 192.168.1.77) decoder in stop mode; but no possible to update image from bronswer , after a few seconds start boot of the 'image nemesis" and starts and is running correctly . turning it off to reboot .I still have again with NO CA FOUND error. some suggestions ? thanks a lot Regards RE: NO CA FOUND Strange problem - mau_ven - 09-11-2014 Dear Friend, I replaced the Sim card A8P but the problem remains, I think the problem is on the transfer, (IP address 192.168.1.100 PC) the decoder syand-by in stop mode, and displays the decoder shows 192.168.1.77, the ethernet connection is up and running ok but the decoder does not respond to ping (see attached image) and can do a reset HW / SW decoder? or do you have any suggestions? thanks a lot Regards RE: NO CA FOUND Strange problem - mau_ven - 09-13-2014 (09-11-2014, 05:50 AM)mau_ven Wrote: You are not allowed to view links. Register or Login to view.Dear Friend, Hello , I can not upload the firmware, checked SIM A8P I tried to connect Terminal from serial ... this is message: someone can give me help? COPY CODE COMPARE CODE 4567 © 2007,2008 Dream Multimedia GmbH. All rights reserved. Dreambox DM800SE FIRST STAGE 1.0/400 {BO23456} 2ND STAGE OK, build #84 (2011-09-01) 0.000 - BCM board setup 0.000 - fp init 0.000 - ca init SW != 9000 error in receive error during t1 transfer cannot read cert(1) SW != 9000 error in receive error during t1 transfer cannot read cert(1) SW != 9000 error in receive error during t1 transfer cannot read cert(1) SW != 9000 error in receive error during t1 transfer cannot read cert(1) SW != 9000 error in receive error during t1 transfer cannot read cert(1) CA invalid OLED found! color oled reset NO CONFIGURATION DATA PRESENT. STOP. lcd: * ERR01: NO CA FOUND 0.532 oled: string too long: '* ERR01: NO CA FOUND' thanks |