[wizardry]

0

Hi,

-DM800se
-Clone
-SIM2.10
-No Ca Found After Flash image

NO CA FOUND message appears at each boot ... I do not understand anything in this DREAMBOX.

When I use Optiflasher Pro 2.0.0.6 with REPAIR. The DREAMBOX go to RESCUE MODE with ip 192.168.1.77.



I log in to see the TELNET BIOS and this is what I found ...




Then I connect to the web interface to reflash.
The HTML page is totally Bug.
So I create a new HTML page.
Then I managed to FLASHE.






--NEWS---



I TESTED SSL82 SSL84 SSL84B. The problem is continued, NO CA FOUND (fucking).

So I continue to try but flashed with another TOOLS.

NCF SIM2 TOOL Repair v2.1:

And. .. surprise. DREAMBOX the boot once ... So during this boot, I can connect via SSH, TELNET, FTP. But if I reboot the box ... NO CA FOUND.


Here is the Message Hyper Terminal:

Code:

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.                                                        
Dreambox DM800SE                

FIRST STAGE 1.0/400 {BO23456}                            

2ND STAGE OK, build #82 (2011-02-25)                                    

0.000  - BCM board setup                        
0.000  - fp init                
0.000  - ca init                
cannot read cert(2)                  
cannot read cert(2)                  
cannot read cert(2)                  
cannot read cert(2)                  
cannot read cert(2)                  
CA invalid          
OLED found!          
color oled reset                
NO CONFIGURATION DATA PRESENT. STOP.                                    
lcd: * ERR01: NO CA FOUND                        
0.876 oled: string too long: '* ERR01: NO CA FOUND'

Please can you help me ... What SecondStage should I use?
What is the latest version IMAGE CLONE Compatible?

All the best,
Wizardry.

[fairbird]

0

Read this topic first please
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]