[delta77]

0

Hi, It would be really nice if you could help me with this:
my pli image was unstable and then I accidentally flashed my clone dm800 with latest original image, then I see the following:
Deam Multimedia -->error! look at [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] *ERR01: NO CA FOUND

Also both yellow and green lights of Ethernet are on even though nothing is connected to it.
prior to all of this I had flashed sim201 team84b last year without any problem.

now the problem is when I use NCF repair tool V3 or Optiflash, it says DM800HD detected, but then "sending flash loader..." doesn't progress. I tried so many times and no luck. I am using RS cable and port com2, just the same way it had worked last year. I am very disappointed now, and obviously I am not an expert, so please help me with this!!!

[fairbird]

0

here you can find all images for your sim
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

And read those topic to fix your box...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
and
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

P.s:Must be you have Rs232 cable to fix your box not Lan cable

[delta77]

0

thanks a lot fairbird... I tried everything but I couldn't fix... but I used another PC with windows 7 and rs323 to usb cable with some patched dreamup and it somehow worked. then I flashed blackhole image, and all appeared fine, but the light on the box front panel is dim and fading, and the box gets really hot too, I wonder could this be a power issue or is it some kind of hardware/software issue?

[fairbird]

0

If box come very hot then hardware problem need technician...If you fix no ca found and box work again then should be close this topic under solved ...