[regenboog]

0

Hello,

Please help me. I also have made a mistake to update my clone (Dreambox 800se HD), as a result I have an error01 NO CA FOUND.
My clone is (was) a Ferarri (87) with OpenGLI

I already downloaded Dreambox OptiFlasher v2.0.0.5 Pro Enigma2 EDition, but i cannot get to the advanced/port part.
I connected my clone through an USB mini cable. I have no null mode cable.
In Windows 7 the location of my clone is Port_#0002.Hub_#0003

So what to do?

Thank you in advance

[fairbird]

0

Have a look this video....




If your box does not contain min flash button then follow this link
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

P.s: Your box is DM800se, So you can not use null modem cable...
Should be use both cable to gather (min usb + Lan) cables

[waj1980]

0

i have a similar problem my screen shows no ca error look at dm7020.com
my box is a clone dm800 Hd it has a estar sim in but it is glued so i cant tell which version, i have tried optiflasher v2.0.0.5 and LD4 shows wrong boot response when selected. any ideas?

[regenboog]

0

Thank you for your quick responce!

I will look if I have a flash button **UPDATE** I have no flash button.

I read your post 'Repair [No Ca Found]'
1. I connected my clone to my router through a LAN cable to get an ipadress.
2. I connected my clone to my computer through mini USB.
RESULT: NO IPADRESS in DISPLAY.
3. I cannot connect with OptiFlasher, what am I doing wrong?

* Is a login and password required? If so what is the login and password?
* If I go to 'Advanced' I cannot select a port. (In Windows 7 the location of my clone is Port_#0002.Hub_#0003)
* Step 4 is missing.

Looking forward to your reply.


PS. I got a modem slot.

[fairbird]

0

In that post for Repair [No Ca Found], No need ip in this Step...
Just connect your box with pc directly without router ..
And Follow this instructions ...
*Select port
*Select LD3
*Select Advanced2
*Select Replay No Ca Found
*Choose Ferrari Sim
*DM800se-sim-ferrari-ssl87f

[regenboog]

0

In that post for Repair [No Ca Found], No need ip in this Step...
Just connect your box with pc directly without router ..
And Follow this instructions ...
*Select port
*Select LD3
*Select Advanced2
*Select Replay No Ca Found
*Choose Ferrari Sim
*DM800se-sim-ferrari-ssl87f

Thank you, but i cannot select a port...Any ideas?
I'm running Windows 7.

[fairbird]

0

Why you can not choose port? Doesn't appeared?

-Try another pc
-Try another mini or lan cables

[regenboog]

0

Why you can not choose port? Doesn't appeared?

-Try another pc
-Try another mini or lan cables

A liitle bit of success!

I can now connect with my clone through OptiFlasher.

My display shows:
SSL
82F
192.168.1.111
***serial mode

My browser shows:
This device's Serial Number is 39***, and was built on 2012/04/18.
Booloader version: Dreambox Second Stage Loader BUILD #79, built 20101015

What are the next steps? Which software en which files do I need so I can complete the recovery?

[fairbird]

0

your box is Ferrari so flash only image for ferrari sim not another image here you can find all ferrari image for your box DM800se
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

About optiflasher :
1-Select Repair [No Ca Found]
2-Ferrari sim
3-DM-800se-ssl87f

[fairbird]

0

Closed Not Followed ...