[happo]

0

Hi all! I have dm800hd pvr clone, I lost front display after I fixed "no ca found" error, when I connect power to it display flashes and closes, power led is working and I am able to use remote conrol.

Could it be bad cable between front display and mainboard as I took that cable off while checking what SIM card I had.

Thank you in advance!

ps. Just to add box is working otherwise fine, sat scan works and I can look tv

[fairbird]

0

Try to to open box and remove front boarder then replace it again and make sure in correct place..and flash new image by using (3-Fix Bad Sector "Sectors Recovery") If you sim2 see here how to:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[fairbird]

0

Solved...