[irfan76]

0

hello i have a dm 800hd sim 2.01

i flash it whit another images and i have No CA found

before the flash my dm 800 have ssl#76

after flash with wrong images,dreambox is blocked ssl#59

Dreambox NO CA FOUND Repair Tool and Optiflasher doesn't redolve the problem

i would like to flash with ssl#84b image or gemini 5.1 ssl#76A

thanks for your help

[fairbird]

0

Look some sim2 not accepted to upgrade to new ssl it was only until to SSl76 ..my be your sim such as those sim..
So try to flash your box by old image with ssl 69 or 70 or 73 any old ssl what you find by using optiflasher and "Fix Bad Sector "Sectors Recovery" method ...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
After that if your box booting again then try to make test if your sim can upgrade to new sslxx .. just flash ssl84a or ssl84b if box upgraded ok and box boot fin then you can flash new image other wise your sim can not upgrade it so return it to old ssl..

[irfan76]

0

thank you fairdird for looking to help me

i'm sendind sll#76 to the box with this link

[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

the boxe have ssl#76 but i'm not finding images for ssl#76 and sim 2.01

i'm finding sim201e-76-gp5.00-OE1.6-dm800-20100429 imge but when i'm flashing

the box returns ssl#59

[fairbird]

0

Look try to flash last bootloader for sim2 ssl84b by optiflasher and turn off box and on then see your box booting fine or you get no ca found..
If booting then flash any new image with ssl84b
If you get no ca found then your sim only accept maximum ssl76 or ssl75

[irfan76]

0

thanks fairbird

i'm sending ssl#84b with optiflasher but i have no ca found

i'm sending sim201e-76-gp5.00-OE1.6-dm800-20100429 image and after

ssl#76 and the box is booting

and then the tv is green and i have a message software error and the box is rebooting when i'm zapping the channels

[fairbird]

0

So in this case your sim as i mentioned before maximum to SSl76 you can not use new bootloader ..So only you can use old image with old (botloader, drivers and kernel) (sorry)

So i think thread Solved will be closed...?

[irfan76]

0

yes fairbird

you can close this post

and thanks you lot's off