[hans71]

0

Help ! DM800-clone i tray all options with optiflasher no help.
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20100419)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
SW != 9000
error in receive
error during t1 transfer
1.459 - load config
dCA: not existent, loading defaults
1.490 - config loaded.
* press [S] to enter setup
OLED found!
BOOT #76(20100419)
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized

© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)

what can i do more ??? please help .

hans71

[fairbird]

0

Which error exactly you got? Just said dm 800 error? we can not help you without full details about error...
Please put here full details for error message on front border what you see it ..
Also see this thread first..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[hans71]

0

sorry !
DM800--clone--SIM201
after power on this error !
DREAM MULTIMEDIA
->error !
red light flashing ! and nothing happening.

hans71

Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
i tray this but not working !

[fairbird]

0

So..Read this post carefully and do that advices then let us know what happen for you...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[hans71]

0

Hello, i take the SIM out and cleansed everything but no success !
same error !
my neighbor has the same Dreambox and i but the SIM from the error-box in his box and the box starting and working well !
as a result of this there is every indication that the processor not working well in this Dreambox ! bad luck !

I tray to find one new motherboard !

Thanks for help !

[fairbird]

0

Sim is fine and problem from motherboard..It is hardware issue.Not software..
So thread closed...