[zEW]

0

Dear Fairbird and Yassinov

I make this new topic as your advise

My box have ERROR: NO CA FOUND with

Dreambox DM800HD
Clone
SIM 2.01
SSL84b

I have tried fix this error w/ OptiFlasher-Pro1.09 using both methods Adv Mode 1 and Adv Mode 2. Both also give message "Dreambox Flashed Successfully" but after reboot, this Error appears again.
I attached here my Sim pics of both sides.



history:
working w/ SSL76D
up FW to #82 then get error:No Sim2.01 found"
using Optiflasher 1.09 to up SSL to #84b (provided by fairbird) and
staring to get "No CA found"

[fairbird]

0

Ok in this case try this:
See this topic [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] and try with "Flashing by Null modem cable only without Network lan"

1-Download bootloader "secondstage_76-r1" from attach
2- Flash it to box
3- See what happen after unplug and plug box
If booting then you can upgrade your bootloader for last one 84b and use last image if not try to put Hyperterminal details here..see this topic [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
P.S: Make sure the sim is in correct place exactly.

[zEW]

0

Ok in this case try this:
...
P.S: Make sure the sim is in correct place exactly.

Hi fairbird,

I have done as instructed with #76-r1, result is still exist the "ERROR:NO CA FOUND"

my Hyper Terminal are ready by now, the message in Dreambox-hyper termianl is below;
--------------
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}

2ND STAGE OK, build #76 (20100419)

0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
* ERR01: NO CA FOUND
--------------

so what I do next

[fairbird]

0

Can you remember what was bootloader you have before problem? And which image you have used and worked well? Also how you got problem, Did you flashed some image" what was"?

[zEW]

0

before the error, my box shows SIM 201 TEAM #76D
the old image works well I cannot remember exactly

the image I uploaded and caused error is OoZooN-dm800HD-9-11-ramiMAHER.nfi from this site [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[luiscarlosalves]

0

caros amigos yassinov e fairbird tenho dreambox 800hd pvr ela nao quer se comunicar mais quando uso cabo null com DreamBox-OptiFlasher-Pro-E2-v1.0.7,DreamBox-OptiFlasher-Pro-E2-v1.0.8,dreambox-optiflasher-pro-e2-v1.0.9 ,NCF-SIM2-v2.1 ,NCF ,DreamUP_patched_by_forhike_and_natas com todos esses quando ligo a dreambox 800hd ela nao comunica ela vai direto para error 1 no ca found ja usei ela com cabo null e cabo de rede e fica do mesmo geito ela nao comunica so aparece na tela da dreambox hd error no ca found igual ai a dos amigos ja coloquei outro card sim e ela nao comunica fica do mesmo geito error no ca found nao da nem tempo e ja entra nessa tela ja estou a mais de trinta dias a tentar e ainda nada do ip aparecer na tela da dreambox hd

[zEW]

0

oh dear!

with my DM800HD #76-r1 w/ ERE: No CA found,
I tried it to fix with REPAIR: No CA found in Optiflasher 1.09 and reboot, this time Oled show no error and my box is booting

I will try w/ #84b and last image fairbird gave me... hope it will OK as #76-r1

update:
after load #84b and reboot, "No CA found" showed up again , I used REPAIR NO CA from OptiFlash but it is no help, then I decided to continue write image Merlin-3-dm800-04-07-ramiMAHER.nfi regardless the error and reboot, there is still "Error No CA" and OptiFlasher cannot fix it this time too

I wrote back bootloader to #76-r1 , then use Opti to fix the "err: No CA found", then wrote the image Merlin-3-dm800-04-07-ramiMAHER.nfi and reboot. The famous "No CA found" appeared again but this time OptiFlasher 1.09 can solve it,

Now my box can boot w/ #76-R1 and image Merlin-3-dm800-04-07-ramiMAHER.nfi

Thank you fairbird for your endless assist,
if you want me to test other method, I am always willing do

[fairbird]

0

@zEW
Look mate.. the right way to use new image with new bootloader is:
1-Flash bootloader 84b.
2-Unplug box then plug it then direct make it on stop mode.
3-Flash new image with bootloader 84b.
4-Unplug box then plug it.

So must be first upgrade bootloader then flash new image....

[zEW]

0

@zEW
Look mate.. the right way to use new image with new bootloader is:
1-Flash bootloader 84b.
2-Unplug box then plug it then direct make it on stop mode.
3-Flash new image with bootloader 84b.
4-Unplug box then plug it.

So must be first upgrade bootloader then flash new image....

I just retried as advise

1. Flash #84b - DONE
2. Unplug box then plug it then direct make it on stop mode.- IP not showed but ERR: NO CA FOUND
- Should I continue to flash new image regardless no IP showed in stop mode???

Thank you

[fairbird]

0

Ok..Now after fix your box and booting well do this:
Try to flash Bootloader 84b by optiflaser and after finish direct before unplug box flash image with 84b.. and see what happen?