01-10-2017, 12:54 PM
0
DM800SEV2
Sim 2.2
Boot no CA found after R01: No CA Found.
Log: Optiflasher 3.0
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000006
WC1=FFFFFFE8
RC2=00000015
WC2=0000003E
RC3=0000000D
WC3=FFFFFFE8
RC4=0000000D
WC4=0000003F
NWC=00000013
RC5=00000006
WC5=00000013
RC6=00000014
WC6=00000013
NRC=0000000D
RW=0000000F
WW=00000058
G=00000000 R=0000000D W=00000013
BL=00000000
RC1=00000003
RC2=00000014
BL=00000001
RC1=00000002
RC2=00000014
BL=00000002
RC1=00000003
RC2=00000011
BL=00000003
RC1=00000005
RC2=00000016
BL=00000004
RC1=00000004
RC2=00000017
BL=00000005
RC1=00000006
RC2=0000001F
BL=00000006
RC1=00000006
RC2=00000015
BL=00000007
RC1=00000008
RC2=0000001A
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox D
FIRST STAGE 1.2/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
[m
Mini-FlashUp, build #88 (2014-02-20)
0.000 - BCM board setup
0.002 - fp init
0.002 - ca init
atr is too short
atr is too short
atr is too short
atr is too short
atr is too short
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: *In BIOS NO CA FOUND
1.387 oled: string too long: '*In BIOS NO CA FOUND'
Without log in display:
Power ON DB Device [ESC to Abort]
DM800SE-v2 Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Connected !
Size: 175,38 KB
Please Wait ! Do not Disconnect Until Done/Reboot !
Nothing happened and optiflasher in busy modus
When trying to flash ssl in display:
Power ON DB Device [ESC to Abort]
DM800SE-v2 Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: SSL88A_seV2.nfi
FSize: 179584 bytes
Authorization id: E8AF1C9B
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Nothing further.
Dreamup stayed in waiting for agknowledge
BTW made a donation again
Sim 2.2
Boot no CA found after R01: No CA Found.
Log: Optiflasher 3.0
BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000006
WC1=FFFFFFE8
RC2=00000015
WC2=0000003E
RC3=0000000D
WC3=FFFFFFE8
RC4=0000000D
WC4=0000003F
NWC=00000013
RC5=00000006
WC5=00000013
RC6=00000014
WC6=00000013
NRC=0000000D
RW=0000000F
WW=00000058
G=00000000 R=0000000D W=00000013
BL=00000000
RC1=00000003
RC2=00000014
BL=00000001
RC1=00000002
RC2=00000014
BL=00000002
RC1=00000003
RC2=00000011
BL=00000003
RC1=00000005
RC2=00000016
BL=00000004
RC1=00000004
RC2=00000017
BL=00000005
RC1=00000006
RC2=0000001F
BL=00000006
RC1=00000006
RC2=00000015
BL=00000007
RC1=00000008
RC2=0000001A
3
COPY CODE
COMPARE CODE
4567
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox D
FIRST STAGE 1.2/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
[m
Mini-FlashUp, build #88 (2014-02-20)
0.000 - BCM board setup
0.002 - fp init
0.002 - ca init
atr is too short
atr is too short
atr is too short
atr is too short
atr is too short
CA invalid
OLED found!
color oled reset
NO CONFIGURATION DATA PRESENT. STOP.
lcd: *In BIOS NO CA FOUND
1.387 oled: string too long: '*In BIOS NO CA FOUND'
Without log in display:
Power ON DB Device [ESC to Abort]
DM800SE-v2 Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Network Web Interface!
Connected !
Size: 175,38 KB
Please Wait ! Do not Disconnect Until Done/Reboot !
Nothing happened and optiflasher in busy modus
When trying to flash ssl in display:
Power ON DB Device [ESC to Abort]
DM800SE-v2 Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Name: SSL88A_seV2.nfi
FSize: 179584 bytes
Authorization id: E8AF1C9B
Flashing Bootloader Phase1...
Finalizing Job Phase2...Please Wait...
Nothing further.
Dreamup stayed in waiting for agknowledge
BTW made a donation again