[Toysoft]

0

SuperSim Japhar DM800HDse : OpenPLi 4.0 for EStar - SEPTEMBER 2015

OpenPLi 4.0 for EStar by Japhar, with latest IPTV software working at the best, including 700 channels ! Download link below. Enjoy !



[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

By MastaG for Japhar Team

Thank you !

[donboon]

0

maybe a stupid question, but is this the ordinary estar v3?
or do I have another sim for this? (SuperSim)

[fairbird]

0

You need to buy new sim ([Only registered and activated users can see links You are not allowed to view links. Register or Login to view.])

[satamuse]

0

hi
well if i knew the price perhaps i will...............
regards

---

hi
if i buy such a sim , is it "ready to use " or will to have to input a flash in the sim
?????
because i've seen that you propose Programmer GCR2 writer for this

[fairbird]

0

If you buy new sim then you can directly to use new images

[Toysoft]

0

Available OpenPLi 4.0 MastaG GStreamer 1.7.0 !

Changes compared to openpli-oe-core gst-1:


- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- DM800 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

and

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1, no changes or extra patches added.
Only patch I've removed is: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch,
because that patch is already accepted and commited to upstream git.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by Christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- DM800 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any DM800 2.6.18 kernel module from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.

Update online or get the new version on the web.

[Toysoft]

0

DM : OpenPLi 4.0 with IPTV (More than 800+ IPTV FREE Channels) by MastaG and Japhar Team

Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!

Changes since previous release:

- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

To find the download link, search for MastaG Japhar OpenPLi 4.0

Enjoy !

[Toysoft]

0

Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!

- DM8000HD+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
- DM800HDse+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
- DM800HD+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
- DM500HD+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]


Changes since previous release:

- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)

Changes compared to openpli-oe-core gst-1:

- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.

Known issues:

- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.


Gstreamer recipes (20151213):
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Dreambox DM500HD:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Dreambox DM500HD V2:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Dreambox DM7020HD:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Dreambox DM800:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Dreambox DM8000:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Dreambox DM800Se:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Dreambox DM800Se V2:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Xtrend ET10000:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET9x00:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET8500:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET8000:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET7x00:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET6x00:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET5x00:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Xtrend ET4x00:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Formuler F3:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Formuler F1:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Mut@nt HD2400:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Mut@nt HD1200:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Mut@nt HD1100:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Mut@nt HD500C:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

MaxDigital XP1000:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

XSarius Fusion HD:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
XSarius Fusion HD Se:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Vu+ Solo:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Solo 2:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Solo Se:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Duo:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Duo 2:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Ultimo:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Uno:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Vu+ Zero:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Fulan Spark:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Fulan Spark7162:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

AirDigital Zgemma Star S / H1 / H2 / 2S:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
AirDigital Zgemma Star HS / H2S / H2H:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

OEM:

- DM8000HD+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
- DM800HDse+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
- DM800HD+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
- DM500HD+ :
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

Sim2 DM800Se:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Sim2 DM800Se V2:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Sim2 DM800:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Sim2 DM500HD:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

E-Star DM800Se:
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
E-Star DM800 (untested):
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[Toysoft]

0

Changes :
- Gstreamer 1.7.1
The mp4 playback from remote urls has been fixed upstream so no more revert for that.
libsoup http-handler has been updated so also no revert for that as well
- New libsoup handler for http urls
- New winter logo
- More free space laugh
Ive added a dirty hack that will upx compress the binary before package_write_ipk
We now have 2 to 3MB more free space (very nice, great success)
- New xvid/divx5 bitstream unpacker by mx3L, this should fix avi files with wrong fourcc
- The usual batch of dvbmediasink fixes by christophecvr and mx3L
- Wifi drivers have been refactored a bit, I dont auto-load the rt7777 anymore.
it should kick in when you plugin your wifi stick.
If not then Ill create a ppanel which will allow you to choose which driver you want to use: rt3070, rt55xx or rt7777 (since they cant be loaded at the same time)

by MastaG

DM8000HD: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

DM800HDse : [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

DM800HD : [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

DM500HD : [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]


Feel free to post images on all your satellite forums you like and share with all your friends these excellent tools and new images with full IPTV support, the best around, even better than on original boxes !!! Thank you !

[BT73]

0

Hi are these images for the estar sim3.0 ????
I have the september image on my dreambox 800hd se sim 3, should i reflash or try to update, what is your advice ??
Thanks for your help....