[TurkPower]

0

My box is:
1. DM800HD PVR (clone)
2. Sim2 (not sure wich it is 2.01 or 2.10)
3. Wrong image insterted Black Hole

Problem from display:

Sim201 team
#84A
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
->error!
* ERRO1: NO CA FOUND


I have tried to use Dreambox OptiFlasher, it upload the flashloader and completes with no problems.
After finished it asks for IP adress to insert, but there's only serial IP on the display and it wont work.
I have tried to use DreamUP patched and it works with flashupload. When flash is finished I try to flash image, but after I turn off and back on the same error comes up on display.

What wrong did I do?

[fairbird]

0

Read this topic... (and important things to know which sim your box include)
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[TurkPower]

0

Is it better now?
Can you please help me?

[fairbird]

0

Please help your self first ...See what kind of sim you have inside box?
Then I can help you ..

[TurkPower]

0

Like I wrote last time. I have opened the box and took out the simcard, but it just says Sim2 inside. Doesn't say wich version it is only Sim2.

[fairbird]

0

Ok ...
So your box Clone (sim2) ...

then read these topics ... Follow it ... and do it
P.s: Must be you have cable (Rs232), Lan cable can not fix No CA Found..

[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[TurkPower]

0

fairbird: Yes LAN Cable doesnt fix the issue I know that...and I use nullmodem cable and flashing or bootloader works as a charm, but after finsihed I try to start the box again, but still same error no ca found on display. Even I have tried to use different bootloaders or images..it still gives me same error.
Do you have any clue have to fix this in right order?

---

using all programs like OptiFlasher, Dreambox NCF Tool or DreamUP patched works with no problem...but after all work was done and I start the box..same error..doesn't matter wich ssl version image I use or ssl bootloaders I use...I'm totally stuck here..

---

Now I tried again to use NCF Tool and got this message:

Power ON DB Device [ESC to Abort]
Operation Start at: 21:28:03
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: 1D00280B
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
Error: IMAGE FOR WRONG ARCHITECTURE !
-Please Select The Correct DB Device Type From SSL List!
* Correct Selection: DM800HD-sim2.xxx
Operation Done at: 21:29:27

---

I tried now with DM800HD-sim2.01-ssl75, and got this message:

Power ON DB Device [ESC to Abort]
Operation Start at: 21:33:00
DM800HD Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Authorization id: 1EB3DAE0
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait...
NO CA FOUND Repaired Successfully !
Operation Done at: 21:34:25

[fairbird]

0

-Remove sim from Box
-keep sim out around 1 hour or 2
-Replace sim again and Try to flash image not bootloader

Make sure to replace sim in correct place ...

[TurkPower]

0

Ok I will take it out...but the box would be off right?

[fairbird]

0

Of Course Box tune it off