01-15-2014, 05:27 PM
0
Hi fairbird
I followed the seven points above and at the end I received: "BIOS MODE SUCCESS & Bios Reset SUCCESS"
Then, getting out of Optiflasher I turned DM off the On holding the STOP button: display gave me again "DHCP" instead of 192.168.1.77
I started the whole process again (7 points) the I made a "Write Bootloder / update" using ssl84D you provided.
This times, it went through the two phases saying "Dreambox flashed successfully" an this time on the display I have stop mode and 192.168.1.77.
So Box seems to be ok at the stage but when I restart (without serial cable and with or without network cable) keeping the power button engaged and pluging electrical socket to enter the stop mode, it well enters into STOP mode but giving me "DHCP" again instead of 192.168.1.77.
So I am back to my starting point.
Your opinion?
Thanks in advance
I followed the seven points above and at the end I received: "BIOS MODE SUCCESS & Bios Reset SUCCESS"
Then, getting out of Optiflasher I turned DM off the On holding the STOP button: display gave me again "DHCP" instead of 192.168.1.77
I started the whole process again (7 points) the I made a "Write Bootloder / update" using ssl84D you provided.
This times, it went through the two phases saying "Dreambox flashed successfully" an this time on the display I have stop mode and 192.168.1.77.
So Box seems to be ok at the stage but when I restart (without serial cable and with or without network cable) keeping the power button engaged and pluging electrical socket to enter the stop mode, it well enters into STOP mode but giving me "DHCP" again instead of 192.168.1.77.
So I am back to my starting point.
Your opinion?
Thanks in advance