[hecta]

0

Hello mates,
After having success over 2nd Failed and No ca found problems, now,I have encountered another stressful System Message - Hardware could not be verified. Please contact Dmultimedia Support Code 0x1800f.

My system is a DM800se
Image was - GP3-dm800se-ramiMAHER 2013
Bootloader was - ssl 84 before the problem.
SIM 2.10

Now I have following on my box information:
Enigma: 2010-12-31-experimental
Image: Experimental 2011-01-01
Frontprocessor version: 1

Detected NIMs:
Tuner A: (empty)
Tuner B: (empty)


I have tried every method here that has been successful even, for me in the past regarding 2nd Failed and No ca found problems but none works.

Now I am able only to boot the box with NCF 2.5 tool. Optiflasher does not work for me in any way now.

using usb and crossed RJ45 couldn't do the trick.

I am able to connect the box by dcc, I have been able to install TSPanel manually.

I can't scan any channels because, the system does not detect tuner.

Using The TSPanel information (General Info) tool, this is what it says about the box:

Image: Experimental 2011-01-01
Enigma: 2010-12-31-experimental
Model: dm800se
dvd modules: -2.6.18-7.4-dm800se-20101215-r0
second stage: dreambox-secondstage - 80-r1
uptime: 01:36:25
mac: 00:09: etc


Now, is it possible to use dcc/FTP to repair the box by fixing the corrupted files? is there any driver I can use through FTP to repair any damages?

I have tried installing images through Tspanel, but it seems I don't do the right image, so it crashes.

Please help if there is any means by software to fix my box. I am broke now.

thanks