11-05-2013, 07:39 PM
(This post was last modified: 11-05-2013, 07:46 PM by Kalle08-15.)
0
(11-05-2013, 01:16 AM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.For DM800se & DM500hd you cannot process Flash operation using the USB to Uart Port only , Lan RJ45 + Mini usb cable is necessary
Okay, I tried it several times with both cables. LAN and USB/miniUSB
It happends the same. Diverse settings, LD1-LD2, normal and advanced mode. Always : "no CA found" on the black display....
The job "Repair [no CA found]" also doesn't work, probably because I don't know what kind of SIM should I chose from the list. It is an A8P SIM, not a 2.10 or 2.01
(11-05-2013, 07:39 PM)Kalle08-15 Wrote: You are not allowed to view links. Register or Login to view.When I try to repair "No ca found" after "Do job" comes a window: "Enter IP shown ON ***STOP-MODE***(11-05-2013, 01:16 AM)YASSINOV Wrote: You are not allowed to view links. Register or Login to view.For DM800se & DM500hd you cannot process Flash operation using the USB to Uart Port only , Lan RJ45 + Mini usb cable is necessary
Okay, I tried it several times with both cables. LAN and USB/miniUSB
It happends the same. Diverse settings, LD1-LD2, normal and advanced mode. Always : "no CA found" on the black display....
The job "Repair [no CA found]" also doesn't work, probably because I don't know what kind of SIM should I chose from the list. It is an A8P SIM, not a 2.10 or 2.01
And There is no IP, only "Err1: no CA found" What should I write in?