[Amiel]

0

-DM800 HD PVR
-Clone
-SIM2.01
-No Ca Found

Hi i've bought a dreambox from ebay with 'No CA Found' error with no information about original image that was on the box.

When i open the box i can see that the system board is manufactured with part number: VIC 2A 94V-01(0821) with No DM800 REV numbers.

SIM card is 'Dream SIM 2.01'

I've been trying for weeks and downloaded multiple images with different bootloaders... and it's driving me CrAzY. I cannot get either an IP address or web interface.

When I use a TELNET connection i get the results below:
_________________________________________
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init

© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
_______________________________________________________


And the NCF-SIM2-v2.5 tool says wrong boot response_
The serial cable is dedicated cable i use (with no adapters) and i am using the serial COM1 port from my PC
_________________________________
Power ON DB Device [ESC to Abort]
Operation Start at: 14:16:56
DM800HD Detected !
Wrong Boot Response!


Help Help Help please, What should i do to resolve

I would be greatful for any assistance you can give


attached are pictures of system board & SIM card

Thank you