06-28-2013, 11:15 PM
0
Have a 8000 Ferrari clone that I want to flash with serial connection. Have tried DreamUp, Ferrari Filler & your optiflasher. No success on any of them.
Have replaced the PSU since the old one was causing reboots.
I have tested 2x usb->rs-232 without any progress.
I have tested a old computer with XP and RS-232 port and nullmodem cable without any progress. Tested the cable by connecting 2/3 and the cable is fine.
Connected to the box using Hyperterminal and was able to see the same info as when you log into telnet when in flash-mode so there seems to be a working connection.
But I can't access it using optiflasher with RS-232.
Any ideas?
Have replaced the PSU since the old one was causing reboots.
I have tested 2x usb->rs-232 without any progress.
I have tested a old computer with XP and RS-232 port and nullmodem cable without any progress. Tested the cable by connecting 2/3 and the cable is fine.
Connected to the box using Hyperterminal and was able to see the same info as when you log into telnet when in flash-mode so there seems to be a working connection.
But I can't access it using optiflasher with RS-232.
Any ideas?