01-25-2013, 11:52 AM
(This post was last modified: 01-25-2013, 12:00 PM by Soulmanfrankie.)
0
(01-25-2013, 03:38 AM)fairbird Wrote:
-open optiflasher.
-Detect & Select Your Serial Port
-Click settings
-Select sectors recovered
-select write bootloader / upgrade
-Click Do Job
-Turn box on
-After optiflasher detect box select bootloader ssl84b
Than after finish flash turn off and on box and see what happen ...
If boot then it is ok, if not try to flash old bootloader as like 76 or 78 or any old bootloader..
Hi again. I really do appreciate your patience. I have followed those instructions EXACTLY as you have written them. I have even tried 'write bootloader/update' in both the 'normal' mode and the 'advanced' mode. I have tried powering up the box while holding the button and while NOT holding the button.
Nothing works. Still get No CA Found.
I feel like it must be something very simple, but...
I am wondering if the Dreambox IP could be wrong. Is there a way to check it?
Please advise.