0
Both of them solutions does not work in my box. I have used Hyperterminal and I post my log...
BCM97400
AB
001A168C
1s
Sync=0
LLMB=0
L2=0
RAC_I=0
RAC_D=0
Copy Code...34TUCV
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.00 {BE4E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #60d (20080519)
FP version 7 detected
In front display show me "ERROR" as only Word with a big Font...
I have try by lan and show me the following:
"This is the ??? bootloader Web Interface.
If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...
You can download your current flash contents (256 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is ?, and was built on N/A.
Booloader version: Dreambox Second Stage Loader BUILD #65, built 20080927
device info firmware upgrade"
Any ideas?
Paco
BCM97400
AB
001A168C
1s
Sync=0
LLMB=0
L2=0
RAC_I=0
RAC_D=0
Copy Code...34TUCV
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM8000
FIRST STAGE 1.00 {BE4E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #60d (20080519)
FP version 7 detected
In front display show me "ERROR" as only Word with a big Font...
I have try by lan and show me the following:
"This is the ??? bootloader Web Interface.
If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...
You can download your current flash contents (256 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is ?, and was built on N/A.
Booloader version: Dreambox Second Stage Loader BUILD #65, built 20080927
device info firmware upgrade"
Any ideas?
Paco