11-20-2012, 05:50 AM
0
Thank you fairbird , Well fol is what I did;
The sim reader is good as I can connect to a GSM sim using DM_sims, then is says atr not found PM atr; but cant connect to the DM800se sim.
As for the Tuner, I am using a backup of my image, which worked fine with the RevM tuner, I will try a another image again and let you know.
I can confirm that the box boots without the sim using NCF, so my conclusion is that it there is a crosscheck between the sim and tuner.
Can someone who has a dm800se cover open remove the sim and try to boot , if it says no ca, use NCF/USB only/ repair noca/ send ssl/ and check is the tuner is recognized when the box is running. kindly let me know. This will not write the ssl as the sim is not there and do no damage to the box or image.
Thank you all.
The sim reader is good as I can connect to a GSM sim using DM_sims, then is says atr not found PM atr; but cant connect to the DM800se sim.
As for the Tuner, I am using a backup of my image, which worked fine with the RevM tuner, I will try a another image again and let you know.
I can confirm that the box boots without the sim using NCF, so my conclusion is that it there is a crosscheck between the sim and tuner.
Can someone who has a dm800se cover open remove the sim and try to boot , if it says no ca, use NCF/USB only/ repair noca/ send ssl/ and check is the tuner is recognized when the box is running. kindly let me know. This will not write the ssl as the sim is not there and do no damage to the box or image.
Thank you all.