0
(!!! 010 INVALID IMAGE (OR OLD VERSION)) this message mean, should by flash last bootloader first then turn off box and then flash image...
Try with optiflasher better as i wrote in my thread and flash botloader for your box and choose (advanced--settings--recover sectors--ok--write bootloader)
The first step was done very quickly.
The image flashing procedure seems to take ages is that right?
Name: Merlin-3-dm800-04-07-ramiMAHER.nfi
FSize: 42358864 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
The progress status remains on 0%
Any suggestions?
I tried through dreamup and got same error.
00:30:43 box type: DM800
00:31:30 Calculating checksum...
00:31:32 Uploading file to box...
01:33:03 box is flashing from its memory...
01:33:27 Flashing failed (!!! 005 too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)), box will be unusable now!!
Try with optiflasher better as i wrote in my thread and flash botloader for your box and choose (advanced--settings--recover sectors--ok--write bootloader)
The first step was done very quickly.
The image flashing procedure seems to take ages is that right?
Name: Merlin-3-dm800-04-07-ramiMAHER.nfi
FSize: 42358864 bytes
Please Wait ! Do not Disconnect Until Done/Reboot !
The progress status remains on 0%
Any suggestions?
I tried through dreamup and got same error.
00:30:43 box type: DM800
00:31:30 Calculating checksum...
00:31:32 Uploading file to box...
01:33:03 box is flashing from its memory...
01:33:27 Flashing failed (!!! 005 too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)), box will be unusable now!!