[tareeq_2]

0

Dear all,

I've fixed my problem. This is how I've done it With Win7 and hardware serial port:

0) Use the loopback technique to check that OS is fine, com1 is fine then ultimately DB9 null modem cable is working fine. I use hyperterminal and short pin 2 and 3 and check that what Im typing appears on the screen, this is validation criteria. This continue so forth until I find the right cable ( 2 iterations)


1)Ensure dreambox is unplugged


2) Connect dbox to com port with NULL MODEM CABLE

3) Fire up Hyperterminal create profile using profile

connection 115200 8 none 1 none

4 Click ok to activate should see a flashing cursor in hyperterminal

5 Power up Dreambox, wait few seconds and hit the 'f' key.

I've seen the 'Err01 no Ca found' dissapear, a few lines of garbage appear in hyperterminal window and dreambox loading onto 'STOP' looking for DHCP assigned IP.

IP had displayed shortly after where I can follow many other procs on here to access http://<displayed ip> and proceed with loading the correct SSL image.


Thanks for all. !!