[donaldbb]

0

Thank you Fairbird for your detailed guidance and useful help, now understand and I found my Problem

I would like to explain that my problem, may be it is usefull for others Clone Dreambox owner which has problem

1. I found my Dreambox is Cloned, [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

2. My Oled was damage because when I installed the wire, I plug in wrong way, there is 2 row of Pin, but I plug-in only one row

3. my Null modem is old, may be mildew or corroded or may be the wired connection is not correct, because null modem wiring has many option
- Null modem without handshaking
- Null modem with loop back handshaking
- Null modem with partial handshaking
- Null modem with full handshaking

See --> [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.],

I had make new one with full handshake connection, the "Wrong Boot Response" cause by the Null Modem Cable, now I can flashed whenever I want

I used below Option
- Advance option with only Null Modem connection (mode 2)
- LD1
- firmware I used is Merlin-3-dm800-04-07-ramiMAHER.nfi and working well

The Problem I still have
1. I cannot update bootloader to SSl84b, I had tried many time, and check with Hyperterminal, sometime it show ssl84b, but somethime show ssl84-r0, I don't know why
2. I cannot use repair CA not found option, It always pop-up with wrong file Name
3. I cannot use Fix Bad Sector "Sectors Recovery", It always pop-up with wrong file Name

Anyway, I found Optiflasher is very useful and good software, also easy to use. Keep up good work.

Thank you