0
Now I realized why my Unit cannot flashed with original firmware when using DreamUp 1.3.3.9, my supplier cheated me with original box but clone SIM
After I used Optiflash, I had succeed to flash firmware SSI84, then I flashed with original firmware the result did not show succeed information, but the indicator bar show 100% and "Do Job" button back to normal mode (black color, not gray color)
After reboot, my unit Show Erro1: CA not found, then my unit cannot start even I cannot flash the boot room, the Optiflasher show
******************
DM800HD Detected
Wrong boot response
******************
After Failed trying optiflash official version with all combination, then I tried Modified version, but optiflash cannot recoqnize my unit, it is kept waiting to plug the power which actually I already plug in the power
Then I tried to connect with hypter therminal
Result
***************************************************
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
**************************************************
After few time testing with optiflasher then I use hyperterminal again, the result even make my unit worst, the Graphical menu was erased and the display show nothing (Blank or black up), the report is as below
**************************************************
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
************************************************
Now I am frustating, I had tried many time to flash the bootloader with official Optiflasher, but the result alway says Wrong boot response
Before flashing I had used web to capture my dream box inforamtion as below
Product name : DM800
Booloader version : Dreambox Second Stage Loader BUILD #76, built 20100419
Flash Size : 64 MB
Production Date : (YYYY/MM/DD)
mID : 13
Serial Number : 62313
MAC Address : 00:09:34:28:cb:3C
Printed Serial Number : A62313000662313
The problem raised after I flashed with bootloader secondstage-dm800-84.nfi
After I used Optiflash, I had succeed to flash firmware SSI84, then I flashed with original firmware the result did not show succeed information, but the indicator bar show 100% and "Do Job" button back to normal mode (black color, not gray color)
After reboot, my unit Show Erro1: CA not found, then my unit cannot start even I cannot flash the boot room, the Optiflasher show
******************
DM800HD Detected
Wrong boot response
******************
After Failed trying optiflash official version with all combination, then I tried Modified version, but optiflash cannot recoqnize my unit, it is kept waiting to plug the power which actually I already plug in the power
Then I tried to connect with hypter therminal
Result
***************************************************
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}
2ND STAGE OK, build #84 (2011-09-02)
0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND
**************************************************
After few time testing with optiflasher then I use hyperterminal again, the result even make my unit worst, the Graphical menu was erased and the display show nothing (Blank or black up), the report is as below
**************************************************
© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)
************************************************
Now I am frustating, I had tried many time to flash the bootloader with official Optiflasher, but the result alway says Wrong boot response
Before flashing I had used web to capture my dream box inforamtion as below
Product name : DM800
Booloader version : Dreambox Second Stage Loader BUILD #76, built 20100419
Flash Size : 64 MB
Production Date : (YYYY/MM/DD)
mID : 13
Serial Number : 62313
MAC Address : 00:09:34:28:cb:3C
Printed Serial Number : A62313000662313
The problem raised after I flashed with bootloader secondstage-dm800-84.nfi
