07-21-2012, 08:31 PM
0
No success at all
this the exactly problem that I have now
DM800 HD se clone
sim2.10
OptiFlasher
Power ON DB Device [ESC to Abort]
Operation Start at:
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait... (here the tool hangs)
Box:
Displays IP address 192.168.1.77 *** Serial Setup
The repair tool hangs at "Finalizing Job Phase2...Please Wait...
Power off the DM800 HD se and it boots with a "2nd failed!" message in the display and
after dhcp and stop
no ip ( I’m booting the box by holding the power button and plug the box)
Restart the box and it displays "2nd failed!"
this the exactly problem that I have now
DM800 HD se clone
sim2.10
OptiFlasher
Power ON DB Device [ESC to Abort]
Operation Start at:
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
Starting Repair [NO CA FOUND] Injecting Phase1...
Finalizing Job Phase2...Please Wait... (here the tool hangs)
Box:
Displays IP address 192.168.1.77 *** Serial Setup
The repair tool hangs at "Finalizing Job Phase2...Please Wait...
Power off the DM800 HD se and it boots with a "2nd failed!" message in the display and
after dhcp and stop
no ip ( I’m booting the box by holding the power button and plug the box)
Restart the box and it displays "2nd failed!"