07-05-2017, 11:10 AM
(This post was last modified: 07-05-2017, 11:31 AM by orlando123.)
0
Hi Yassinov thank you for that i founf those settings in the new ver3 OptiFlasher, and i did the LD5 as per your advice all went well to the point after flashing last text in OptiFlasher screen (( Please Wait! do not disconnect until done/reboot! Dreambox Flashed Successfully ))) I waited for about 5 mins and the box never rebooted and when i restarted the box to see if it had worked i got the same 2ED Failed. what could be the problem that the box is not rebooting after the flash ?
PS i just did the Repair (No Ca Found) with log monitor on and this is what i got ((( Dreambox D
FIRST STAGE 1.0/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #82 (20100722)
PS i just did the Repair (No Ca Found) with log monitor on and this is what i got ((( Dreambox D
FIRST STAGE 1.0/400 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #82 (20100722)
