12-15-2015, 11:18 AM
0
Users running the previous Gstreamer 1.7.0 image, should be able to peform a Software Update!
- DM8000HD+ :
- DM800HDse+ :
- DM800HD+ :
- DM500HD+ :
Changes since previous release:
- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
Gstreamer recipes (20151213):
Dreambox DM500HD:
Dreambox DM500HD V2:
Dreambox DM7020HD:
Dreambox DM800:
Dreambox DM8000:
Dreambox DM800Se:
Dreambox DM800Se V2:
Xtrend ET10000:
Xtrend ET9x00:
Xtrend ET8500:
Xtrend ET8000:
Xtrend ET7x00:
Xtrend ET6x00:
Xtrend ET5x00:
Xtrend ET4x00:
Formuler F3:
Formuler F1:
Mut@nt HD2400:
Mut@nt HD1200:
Mut@nt HD1100:
Mut@nt HD500C:
MaxDigital XP1000:
XSarius Fusion HD:
XSarius Fusion HD Se:
Vu+ Solo:
Vu+ Solo 2:
Vu+ Solo Se:
Vu+ Duo:
Vu+ Duo 2:
Vu+ Ultimo:
Vu+ Uno:
Vu+ Zero:
Fulan Spark:
Fulan Spark7162:
AirDigital Zgemma Star S / H1 / H2 / 2S:
AirDigital Zgemma Star HS / H2S / H2H:
OEM:
- DM8000HD+ :
- DM800HDse+ :
- DM800HD+ :
- DM500HD+ :
Sim2 DM800Se:
Sim2 DM800Se V2:
Sim2 DM800:
Sim2 DM500HD:
E-Star DM800Se:
E-Star DM800 (untested):
- DM8000HD+ :
- DM800HDse+ :
- DM800HD+ :
- DM500HD+ :
Changes since previous release:
- mx3L's gstreamer revert which fixes mp4 playback from remote locations
- Spark drivers updated to 20151113
- Using aio-grab from oe-alliance which includes fixes for sprak receivers
- New Japhar IPTV List (thanks to ToySoft).
- DM8000 has no more gsod's now (thanks to ToySoft for testing!)
Changes compared to openpli-oe-core gst-1:
- Ships with gstreamer upstream master git:
Using the same patches as openpli-oe-core gst-1 with only these changes:
Removed: 0001-baseparse-post-tag-list-when-avg-bitrate-changes-at-.patch
because this patch was already checked in upstream.
Added: 0001-Revert-qtdemux-respect-qt-segments-in-push-mode-for-.patch
By mx3L which fixes mp4 playback from remote locations.
- Every receiver uses christophecvr's multibox dvbmediasink.
- Using libtrmp and rtmpdump from oe-alliance.
- Some small enigma2 patches for Dreambox receivers (ac3/dts bypass and blanking on zap support).
These are only applied for Dreambox receivers.
- AAC to AC3 transcoding V2 by mx3L (requires a fast cpu).
- IPTV Player from samsamsam included (thx to Athoik for the recipe).
- Large list of public IPTV streams included thanks to the Japhar Team.
- Updated libcdio and cdtextinfo for audio-cd support by christophecvr.
- DM800Se, DM7020HD and DM800SeV2 driver upgraded to 20151201:
added si2166b blindscan support
- Spark images includes the pti.ko from OpenATV so softcam's should work now.
- Using aio-grab source from oe-alliance which includes fixes for spark receivers.
- The 2.6.18 kernel will now always pass the vermagic check when loading modules.
Now you can try and load any kernel driver from OE1.5 to 2.0.
Known issues:
- DM800 first boot will take a while, please be patient. The next boot will be faster.
- On spark/spark7162 you need to set 'boxtype = dreambox' for oscam dvbapi.
We're using the OE-A drivers and 'duckbox' doesn't seem to work on these.
- On spark/spark7162 you need to set a skin which doesn't resize the framebuffer.
Because sometimes it doesn't scale back to fullscreen.
I've included the MX-HQ7 skin for use as workaround.
- On Zgemma Star you cannot use fullHD skins.
This is a hardware/driver limitation.
Please don't try it, it will crash enigma2.
- Some Dreambox remotes behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.
Gstreamer recipes (20151213):
Dreambox DM500HD:
Dreambox DM500HD V2:
Dreambox DM7020HD:
Dreambox DM800:
Dreambox DM8000:
Dreambox DM800Se:
Dreambox DM800Se V2:
Xtrend ET10000:
Xtrend ET9x00:
Xtrend ET8500:
Xtrend ET8000:
Xtrend ET7x00:
Xtrend ET6x00:
Xtrend ET5x00:
Xtrend ET4x00:
Formuler F3:
Formuler F1:
Mut@nt HD2400:
Mut@nt HD1200:
Mut@nt HD1100:
Mut@nt HD500C:
MaxDigital XP1000:
XSarius Fusion HD:
XSarius Fusion HD Se:
Vu+ Solo:
Vu+ Solo 2:
Vu+ Solo Se:
Vu+ Duo:
Vu+ Duo 2:
Vu+ Ultimo:
Vu+ Uno:
Vu+ Zero:
Fulan Spark:
Fulan Spark7162:
AirDigital Zgemma Star S / H1 / H2 / 2S:
AirDigital Zgemma Star HS / H2S / H2H:
OEM:
- DM8000HD+ :
- DM800HDse+ :
- DM800HD+ :
- DM500HD+ :
Sim2 DM800Se:
Sim2 DM800Se V2:
Sim2 DM800:
Sim2 DM500HD:
E-Star DM800Se:
E-Star DM800 (untested):