02-15-2015, 08:44 PM
0
The video shows how can I flash a new image using the "stop-mode". I used this way to flash new images until it worked. Now I'm not able to reach the stop-mode: I never see an IP address on the screen, only the NO CA FOUND message.
I've connected the PC and the box with cross-cable. I configured the eth interface manually as it was written. If the cross cable was connected to the dreambox then no peer was detected by the windows:
$ ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
If I put the other end of the cable into my laptop then the IP config was ok:
$ ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I've connected the cable back to the dreambox.
I followed the steps written in the thread 1136. I did these steps more times during the weekend but now I did screenshots as well. When I start the Optiflash program it gives an access violation message but after it the program starts. When I press the button do-job, a message is printed "Power on DB device", I power the dreambox and nothing happens. How can I attach the screenshots to the posts? Shall I send them in PM?
Bootlogs, here is. It's not a joke. I already wrote that hyperterminal displays garbage only. The info is printed not in one big step but in bursts. So according the timings of the bursts it looks like a real log. I played a lot with the hyperterminals emulation settings (ANSI, VT100, VT52) but garbage only. The garbage looked a little bit different but was garbage.
�88�>��8����>����8��8�8>8�8>88�8�8>8>�8�8>8��8�8>8��8�8>�>�>�>�>8�
���>�>�>�8�8>8��8�8�8��8888888�88�8�88888888�88>88�8�888888888>8��8�
8����8>88��8888888�8�8���8888888�8�88��88888888�8���8����8>
88�>�88888888�8��>�8888888�8�8�8��88888888�8>88�>�888888888>8��>�88888888�
8>88�>�8888888�8�8��>�88888888�8>8�88�88888888�88��8888888�8�8���8888888>>
�8��88888888888�88888888�8�88888888�8�888�888888888>88�8�888888888>88��888
8888�88>8�888�88888888�8>88�8�888888888>88��8888888�8�8�888�88888888�88�8
�888888888>88��8888888�88>8�888�88888888�88�8�888888888>88��8888888�8�8�8
88�88888888>�88�8�888888888>88��8888888�8�8�888�88888888�8>88�8�888888888>
88��8888888�8�8�888�88888888>�88�8�888888888>88��8888888�8�8�888�888888
88>�88�8�888888888>88��8888888�8�8>�8>��8��>��8���8>��8�8��8���>��8�
��8�����8>�8�88>�888888�8��>8>��>�>�>��>8�>88�8>�>8�>�>��
8��>�8����8����>8�>8�88888��8�8�88�8�88���8�88�8888����
�������8>���>�>�8����8>�>��8��>�8�8�>�>�8�>�>�8�8�>>
>8>888��8�8>�>�888�>8�>8>�>��8�>�8�>�>�8�8>��8��>8���>8
8�>��8�8��>8�>88�8��>�8>�>>8�>�8�>�8�>�>8�>�>8�>�>�8�>�
8�8�>>>�>8>��>�8��8����8�>�8�>8��>��>8�8�>>>8�>�>88�
�>�>�>8>>>>�8�8��>��8��>�>8��8�>>8���>��88��8������8��8>�>�
>�8�8>�>>��>�>�8��>�>�8�8>8888�8�8>88�8>88�888>8�8888888>88�88�
�>��8����8888888>88�88>>�8888888>88�88>>�8�888�8��>�>8�>�
>8��8�888�8��>�>8�>�>8��8�888�8��>�>8�>�>8��8�888�8��>�>8�>
�>8��8�888�8��>�>8�>�>8��8>�88>�>>�8�8�8��8�>�>�8>8>�>�>�>88>
�>��8��>��8�8�88�8�8�8��8��8�8�88��8�8�>�8�88�8��8�>>�888�
8�>8�8�8>�88�88�8�8�8�88�8>88>�>��888��8�>�>�8��>�>8>�>�>��8888�>8�8
I've connected the PC and the box with cross-cable. I configured the eth interface manually as it was written. If the cross cable was connected to the dreambox then no peer was detected by the windows:
$ ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
If I put the other end of the cable into my laptop then the IP config was ok:
$ ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I've connected the cable back to the dreambox.
I followed the steps written in the thread 1136. I did these steps more times during the weekend but now I did screenshots as well. When I start the Optiflash program it gives an access violation message but after it the program starts. When I press the button do-job, a message is printed "Power on DB device", I power the dreambox and nothing happens. How can I attach the screenshots to the posts? Shall I send them in PM?
Bootlogs, here is. It's not a joke. I already wrote that hyperterminal displays garbage only. The info is printed not in one big step but in bursts. So according the timings of the bursts it looks like a real log. I played a lot with the hyperterminals emulation settings (ANSI, VT100, VT52) but garbage only. The garbage looked a little bit different but was garbage.
�88�>��8����>����8��8�8>8�8>88�8�8>8>�8�8>8��8�8>8��8�8>�>�>�>�>8�
���>�>�>�8�8>8��8�8�8��8888888�88�8�88888888�88>88�8�888888888>8��8�
8����8>88��8888888�8�8���8888888�8�88��88888888�8���8����8>
88�>�88888888�8��>�8888888�8�8�8��88888888�8>88�>�888888888>8��>�88888888�
8>88�>�8888888�8�8��>�88888888�8>8�88�88888888�88��8888888�8�8���8888888>>
�8��88888888888�88888888�8�88888888�8�888�888888888>88�8�888888888>88��888
8888�88>8�888�88888888�8>88�8�888888888>88��8888888�8�8�888�88888888�88�8
�888888888>88��8888888�88>8�888�88888888�88�8�888888888>88��8888888�8�8�8
88�88888888>�88�8�888888888>88��8888888�8�8�888�88888888�8>88�8�888888888>
88��8888888�8�8�888�88888888>�88�8�888888888>88��8888888�8�8�888�888888
88>�88�8�888888888>88��8888888�8�8>�8>��8��>��8���8>��8�8��8���>��8�
��8�����8>�8�88>�888888�8��>8>��>�>�>��>8�>88�8>�>8�>�>��
8��>�8����8����>8�>8�88888��8�8�88�8�88���8�88�8888����
�������8>���>�>�8����8>�>��8��>�8�8�>�>�8�>�>�8�8�>>
>8>888��8�8>�>�888�>8�>8>�>��8�>�8�>�>�8�8>��8��>8���>8
8�>��8�8��>8�>88�8��>�8>�>>8�>�8�>�8�>�>8�>�>8�>�>�8�>�
8�8�>>>�>8>��>�8��8����8�>�8�>8��>��>8�8�>>>8�>�>88�
�>�>�>8>>>>�8�8��>��8��>�>8��8�>>8���>��88��8������8��8>�>�
>�8�8>�>>��>�>�8��>�>�8�8>8888�8�8>88�8>88�888>8�8888888>88�88�
�>��8����8888888>88�88>>�8888888>88�88>>�8�888�8��>�>8�>�
>8��8�888�8��>�>8�>�>8��8�888�8��>�>8�>�>8��8�888�8��>�>8�>
�>8��8�888�8��>�>8�>�>8��8>�88>�>>�8�8�8��8�>�>�8>8>�>�>�>88>
�>��8��>��8�8�88�8�8�8��8��8�8�88��8�8�>�8�88�8��8�>>�888�
8�>8�8�8>�88�88�8�8�8�88�8>88>�>��888��8�>�>�8��>�>8>�>�>��8888�>8�8