02-15-2015, 03:17 PM
0
After reading a lot of topics I know that it would be important to have a good connection over miniusb cable but I simple don't have connection over usb. I've installed the drivers from dream-multimedia (CP210x_VCP_Win_XP_S2K3_Vista_7.zip), the device seems to be ok according the XP. I start the optiflasher program and press do the job button. The program says "Power on DB device". I turn it on but nothing happens, no device detected, no "SERIAL mode" text on the LED screen, nothing. It just waits.
I read the topics you mentioned but in all topics the optiflasher program is able to connect to the box. I've installed the proper driver (I think) and set the COM-port to 115200 8N1 and I don't see what else can I do for building the connection. Maybe I miss something here... I hope I do.
I cannot communicate with box over USB. I believe that it should work (as it works for almost everybody) but it doesn't work for me. Believe me that I'm not happy that I can't take the easy way. It looks like that beside the "NO CA FOUND" problem I has an extra issue with the usb port what I cannot solve.
This is the reason why I'm asking my questions.
I read the topics you mentioned but in all topics the optiflasher program is able to connect to the box. I've installed the proper driver (I think) and set the COM-port to 115200 8N1 and I don't see what else can I do for building the connection. Maybe I miss something here... I hope I do.
I cannot communicate with box over USB. I believe that it should work (as it works for almost everybody) but it doesn't work for me. Believe me that I'm not happy that I can't take the easy way. It looks like that beside the "NO CA FOUND" problem I has an extra issue with the usb port what I cannot solve.
This is the reason why I'm asking my questions.