12-18-2014, 09:26 AM
0
(12-18-2014, 12:46 AM)fairbird Wrote: You are not allowed to view links. Register or Login to view.If you select advanced mode2 and flash bootloader form Repair no ca found feature will be take less than a minute...Hello Fairbird
as they are now several days that I fight with my decoder, I wanted to know or understand better
if the procedure I do is correct or you can improve:
1) I removed the mono Tuner DVB-S;
2) Decoder off connect the mini USB to Notebook (Windows 7 Ultimate), (the notebook recognizes the COM port 4);
3) launch Optiflasher and I select (no ca found + Mode 1 [Usb Lan +]);
4) I click on the button (Busy)
5) Optiflasher tells me to connect DB;
6) I turn the DM800 HD se;
7) Nothing happens !!.
I was told to check or replace cables and I did. Work environment (Windows XP)
I can do even this, but first I want to point out:
1) if the COM port is detected, then the following should also proceed? !! ??,
2) I read that someone has shown if there are on the SIM (5 V) ??? it is true ??
sorry if I have dwelt, but I want to finish something they asked me
€ 40.00 for the repair !!
Thank you so much for understanding !!
