11-23-2014, 03:16 PM
0
(11-23-2014, 01:08 AM)fairbird Wrote: You are not allowed to view links. Register or Login to view.why you flash image then secondstage and flash image again ...
Just flash new original image once then close box and open it again ...
Because all images include inside it bootoader (secondstage)..
So no need to flash (secondstage) again ..
Hi Fairbird,
This is what is happening...
I start optiflasher- select advanced- select advanced mode 2 (rs232)-hit detect ports and select com1-loader and select LD2- click on write image and select Do Job- power up dreambox, then I get "DM800HD detected!" - Dreambox detected OK -sending flash loader- second stage OK - boot success and ready for job process! I then select image (DM800-3.2.4) and hit open- I then get Name -Release DM800-3.2.4.nfi
External detection info
NFI:OE 1.6-2.6 Detected! - DM800HD Detected- Smart check a8p-ss184 detected- safe flash mode enabled!
I hit do the job and optiflasher says power on DB device and it goes straight back to when I first powered up the DB DM 800HD Detected etc sending flash loader, and I' stuck in a loop!!
Any Ideas!!
Cheers
Dave