[giannissk]

0

hi yassinov.i have a dreambox800 genuine and uses pli image 1.6.
I wanted to I upgrade to tsimage_30_oe-2.0-dm800-20130406.nfi
i use lan update first,and after dreamup and We take the following message.
6:00:53 μμ box type: DM800
6:02:40 μμ Calculating checksum...
6:02:45 μμ Uploading file to box...
7:09:00 μμ box is flashing from its memory...
7:10:06 μμ Flashing failed (!!! 005 too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)), box will be unusable now!!
What am I doing wrong
thanks for your time

[fairbird]

0

1-Download from this link last bootloader (SecondStage) for your sim SSl84
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
2-Flash bootloader to box
3-close box
4-Flash any new image you want
;)

[giannissk]

0

Thank you very Mach.its working with old image and now I try the new.
Thanks again

---

unfortunately raped., when loading the new image after 35% goes to 80% and at the end you keep getting the following error :too much data (or bad sectors) in partition 3 (end: 04000000, pos: 04000000)

---

reload the sekonstage but unfortunately I had done wrong before. no boot.

[fairbird]

0

Flash new image by using recovered bad sectors ...
1-If you have pro key for optiflasher follow this link (Fix Bad Sector "Sectors Recovery")
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
2-If you don't have pro key read this topic..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]