[francomat]

0

Dreambox DM800 HD
Clone
Sim 2.1
No Ca Found After Flash image

When power on the box the red led flashes.
With DreamUp is impossible to flash via serial, only via web.
Via web i have access at page but all upload are are useless.
With a friend with an older version of optiflasher

With hyperterminal:
"© 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BE3E3E3E3E3}
Second stage loader wasn't found. Don't panic - it's not a (real) problem.
You don't need to repair your Dreambox. It just means that the flashrom with
the graphical menu was erased. You can restore this with a tool like DreamUp
with serial access.
RESCUE{012}
MICRO2ND OK, build #56 (20080115)"

How I can do?

Thank's a lot

[fairbird]

0

First try to download last version for optiflasher..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Second go to this thread and follow this:
1-use " 1-Null modem cable only without Network lan." and then select Repair "No Ca Found" and choose "Dm800-sim2.01-SSl84b" and continue.
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
2-After turn off and on box use "Flashing by Network lan only" to flash new image "make sure right one for your sim..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[francomat]

0

Any result
after
1-use " 1-Null modem cable only without Network lan." and then select Repair "No Ca Found" and choose "Dm800-sim2.01-SSl84b" and continue.
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

The red stop to flash. I have turned off and on the box and when I try to connect with Optiflasher with IP adress: "Socket error # 10060 Connection timed out" and the red light flashes!!!

[francomat]

0

Did you tryed Advanced Mode 2 ?

Ofcourse

[fairbird]

0

Now try "Fix bad sectors' method by optiflasher and select Repair "No Ca Found"

[francomat]

0

Now try "Fix bad sectors' method by optiflasher and select Repair "No Ca Found"

I have tried, but nothing. I have send gemini2-470-dm800-201002090910 from serial too but nothing

[fairbird]

0

Exactly, nothing what?
optiflasher finished or doesn't worked or what ...please take picture and upload it here...

[francomat]

0

Now try "Fix bad sectors' method by optiflasher and select Repair "No Ca Found"

I have tried, but nothing. I have send gemini2-470-dm800-201002090910 from serial too but nothing

After Fix bad sector    

after Write Image    

And when power on the red led flash!

[fairbird]

0

What do you see on the front screen "No ca Found" or another things?

[francomat]

0

What do you see on the front screen "No ca Found" or another things?

In the front screen there is "error".