0
(08-07-2012, 11:21 PM)fairbird Wrote: [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
2-Use optiflasher, and use "Null modem cable only without Network lan" method to flash Bootloader. Then unplug box and plug it and use "Flashing by Network lan only" to flash image "Original image only for your box"
See here how to ...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
P.s: You must have Lan cable + Mini usb cable to fix "NO CA FOUND" And if you can not use optiflasher "LD1" must make donation to get Key pro to optiflasher and use Loader "LD2" for GENUINE box.
I put bootloader SSL84 for genuine box.
I made a donation and I have the keys to use “LD2”.
I use Lan cables + mini USB, and I use Loader “LD2” for GENUINE box.
When I click repair “Ca not found”, here what I obtain:
Power ON DB Device [ESC to Abort]
DM800HD SE Detected !
Dreambox Detected...Ok!
Sending Flash Loader...
Second Stage OK!
Boot Success & Ready For Job Process!
And then more nothing.
The software stopped and say "Do job".
Which is the problem?