[fre]

0

Hi,
I have DM800 HD PVR. I was (am) so silly to flash it with Ferrari-SSL88F-allrussian-7-20120609-Elhawary.nfi .Got error! look at [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] * erro1: No ca found.
MODEL: DM800 HD PVR
GENUINE
SIM: have no idea
NO CA found after flashing of image
I have used Optiflasher and got message "Wrong Boot Response". as I understand, it's because there is no SSL88F in the list. So please tell me, what can I do...
P.S. I have no paypal. Is there another way to make donation?
THX in advance.
Best Regards

[fairbird]

0

Your box as you mentioned GENUINE so your sim is GENUINE also multimedia..
So...
From here download last SSl84 "bootloader" for GENUINE box
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
Then download dreamup from here
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]
....
You must have null modem cable not LAN cable
Now open dreamup and remove check from use network then flash bootloader, then after flash any original image not patched image.

P.s : SSl88F is bootloader for Ferrari sim not for GENUINE..

[fre]

0

it.s writing "file too big"

---

cant sed ipk file by dreamup to dream.

[fairbird]

0

Ops..i,m sorry
here download in attach..

[fre]

0

Ops..i,m sorry
here download in attach..

dream up says : "file too big" :(

---

finally dreamup starts flashing. I used enforcer to activate flash button. its calculating checksum for last 10 minutes :)
P.S. I have donated :)

[fairbird]

0

Ok.. if you donated for optflasher wait yassinove to send you pro key..
And use optiflasher, open it and click Advanced then change loader to "LD2" it is loader for genuine box and use "Null modem cable only without Network lan" method to flash Bootloader. Then unplug box and plug it and use "Flashing by Network lan only" to flash image
See here how to ...
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[fre]

0

I did everything how you said, but after DM detected, it's writing wrong boot response :(
I have removed sim and put it back. still nothing... :(
I think it has no communication with sim.

[fre]

0

Try use "LDR2" option for Genuine type then write original image to your box !

"wrong boot response" says Optiflasher
Then I have connected with Hyper.
that's what hyper term is saying:
© 2007,2008 Dream Multimedia GmbH. All rights reserved.CA invalid
OLED found!
NO CONFIGURAT
Dreambox DM800T. STOP.
FIRST STAGE 1.00 {BO23456}
lcd: * ERR01: NO CA FO
2ND STAGE OK, build 88F (2012
0.000 - BCM board setup
0.472 - fp init
0.474 - ca init
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
SW != 9000
error in receive
error during t1 transfer
cannot read cert(1)
CA invalid
OLED found!
NO CONFIGURATION DATA PRESENT. STOP.
lcd: * ERR01: NO CA FOUND

[fairbird]

0

hyper terminal Says "build 88F" so i think your sim is ferrari.
Please upload pictures to your sim in both side..to make sure

[fre]

0

hyper terminal Says "build 88F" so i think your sim is ferrari.
Please upload pictures to your sim in both side..to make sure

No, my sim is not ferrari. it;s 4 year old. it's white.with some numbers on it.it was sticked by glue and I cant read the exact numbers.
By mistake I flashed my dreambox with clone image named Ferrari-SSL88F-allrussian-7-20120609-Elhawary, that why we can see build 88 in hyper terminal. previously flashed image was original iCVS-Image-dm800-20111121185945.