[deepdish]

0

When I boot my original DM800 HD, I get the message error no sim2xx found immediately.
Is it possible to solve this with your software Yassinov? and please tell me how.
I have looked everywhere on the internet, but no result, please help!

[zEW]

0

Dear Yassinov,

Sorry to dig this thread again but I am newbie with DM800 and hope you can help me

I also have the error "no sim2xx found" when power on my DM800 clone, Sim 2.01 as I already opened the box and check the simcard inside.
Before that, the box working normally with OLED logo "Sim201 team#76D", after I update some pluggin in Blue panel, it became unbootable at restart at green screen "software failed..." on TV display
I have reinstalled it with "OoZooN dm800HD 2011-9-11 ramiMAHER 09-21.nfi" by DreamUP, the result is this new OLED logo "SIM201 team#82 [Only registered and activated users can see links You are not allowed to view links. Register or Login to view.] -> error! *ERR: No SIM2XX FOUND"

I google a lot and some results point to your software is the good solution, hope you can advise me how to rescue my DM800 and which firmware I should use to unbrick my box.

Thank you so much

[fairbird]

0

Or Try first to flash SSl84b and unplug box then flash any new image contains ssl, if not work do what Yassinov mentioned.

[zEW]

0

thank you Yassinov and fairbird for your advise

@ Yassinov advise: I rechecked and found that the Chinese supplier attached to my box a note that "should not update w/ software later that 76D" . I picked "OoZooN dm800HD 2011-9-11 ramiMAHER 09-21.nfi" because it is not show #76 or #82 but after update it is become #82.

@ fairbird : I prefer to take your advise flash SSL84b before come back w/ #76 image, but I am so noob that cannot find here or anywhere to get the file SSL84b alone as you recommend, i would appreciate if you give extra hint where to download that "SSL84b"

Thank you again

[fairbird]

0

In attach. file comprese after extract you get secondstage 84b flash it and unplug then flash this image after that unplug and plug box..see what happen and let us know..
[Only registered and activated users can see links You are not allowed to view links. Register or Login to view.]

[zEW]

0

Sorry to trouble you again, fairbird, but I cannot see any attachment as you referred as above.

In the link you gave above, I download it and only see the image "Merlin-3-dm800-04-07-ramiMAHER.nfi" inside, no SSL84b

[fairbird]

0

Sorry i forget it...here in attach.
flash first bootloder if you not success flash that merlin3 image.

[zEW]

0

Sorry i forget it...here in attach.
flash first bootloder if you not success flash that merlin3 image.

Thank you fairbird,

I have done as you advised, using Dream Up , I flashed ssl84b till done successfully then unplug, after replug, I got "No CA found"
I switch to DreamBox-Optiflasher then fix my box with "REPAIR: No CA found", DB-Oftiflasher worked like champ, my box now show IP so I start flash with "Merlin-3-dm800-04-07-ramiMAHER", again it done with successful, but that is all, when I reboot the box, my DM800 shows "No CA found" again
I tried fix it second time w/ "Repair:NO CA FOUND" but this error always came back after reboot,
I have not tried other image except the Merlin-3-dm800-04-07-ramiMAHER

Please take a look in above and give me some further advise...
Thank you

[fairbird]

0